2009:Mechanical 2.28.2009: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Drivetrain (talk | contribs) (New page: = Summary from 2-26-09 = Set out to prove out the add on helix idea for the shaft rollers. Used a PVC roller and set it up with 2 round belts with helix winds on both sides of the b...) |
(No difference)
|
Revision as of 17:39, 1 March 2009
Summary from 2-26-09
Set out to prove out the add on helix idea for the shaft rollers. Used a PVC roller and set it up with 2 round belts with helix winds on both sides of the belts. Used our wooden mock up with a std plucker pulley shaft on the bottom. The concept worked great, it could feed balls up and feed them out the top. We used a stationary piece of wood board for the rear section. The helix sections would resote a belt that is pushed out of the desired tracking groove. There is a short video that Cynette took and it is placed on the conveyer redesign comments link near the 2-16-09 work sheet day log.
