2009:Electrical Board Inventor: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
(Image upload with captions.)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[Image:Electrical_Board.jpg|First version with everything crammed together on a 24x30!! (vertically) Wheee!! Crammed crap supposedly to be attatched to chassis.]] 
[[Image:Electrical Board.jpg|First version with everything crammed together on a 24x30!! (vertically) Wheee!! Crammed crap supposedly to be attatched to chassis.]]   


<br>


[[Image:ElecBoard2.jpg|Electrical Boar part two. 11x30 Supposedly attatched to chassis. No go. Kaboom.]]


[[Image:ElecBoard2.jpg|Electrical Boar part two. 11x30 Supposedly attatched to chassis. No go. Kaboom.]]
<br>


[[Image:Final Board.gif|Hopefully the final version of the electrical board on the robot hopped--26x30]]


5.79lbs of electronics mounted on side board (minus wire/connector weight).


[[Image:Final_Board.gif|Hopefully the final version of the electrical board on the robot hopped--26x30]]
<br>
 
 


Credits to Collin for working on this so awesomely.
Credits to Collin for working on this so awesomely.

Latest revision as of 20:34, 30 December 2009

First version with everything crammed together on a 24x30!! (vertically) Wheee!! Crammed crap supposedly to be attatched to chassis. 


Electrical Boar part two. 11x30 Supposedly attatched to chassis. No go. Kaboom.


Hopefully the final version of the electrical board on the robot hopped--26x30

5.79lbs of electronics mounted on side board (minus wire/connector weight).


Credits to Collin for working on this so awesomely.