2009:Electrical Main - 1.24.09: Difference between revisions

Latest revision as of 13:38, 14 November 2010

01.24.2009

Start time:10:30

End time:

Members present:Michael H, Rika L, Crystal V., Oranges, Apples, Karen

Tasks Completed:

position of battery on robot is determined.
USB mouse investigated. Detector output signals defined. Programming subteam believes they can interpret these signals.

Tasks In Progress:

Better figure out electrical interface to mouse. Define electrical interface to other style mice if USB mouse turns out to be too difficult.
Possibly position cRIO setting on cross rail of robot behind battery? Requires ribbon cable (25-pin) to remotely locate module that plugs into cRIO module (due to limited height).

Tasks to Complete:

@@ Line 5: / Line 5: @@
 End time:
 Members present:Michael H, Rika L, Crystal V., Oranges, Apples, Karen<br>
 Tasks Completed:
 *position of battery on robot is determined.
-*position of cRIO will be setting on cross rail of robot behind battery.
+*USB mouse investigated.&nbsp; Detector output signals defined.&nbsp; Programming subteam believes they can interpret these signals.
 <br>Tasks In Progress:
-*Figure out electrical interface to mouse.
+*Better figure out electrical interface to mouse.&nbsp; Define electrical interface to other style mice if USB mouse turns out to be too difficult.
+*Possibly position cRIO setting on cross rail of robot behind battery? Requires ribbon cable (25-pin) to remotely locate module that plugs into cRIO module (due to limited height).
 <br>Tasks to Complete:
 *determine position of circuit breaker panel on the robot.
 *mechanical needs to build support housing for battery.