2011:Button Measurements: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Programming (talk | contribs) (New page: Listed below are the measured or recommended hole sizes for parts that may be used for this years control system: {| width="500" cellspacing="1" cellpadding="1" border="1" |- ! scope="co...) |
(No difference)
|
Revision as of 10:54, 15 January 2011
Listed below are the measured or recommended hole sizes for parts that may be used for this years control system:
| Part | Size |
|---|---|
| Small Toggle Switch | Actual = 0.252" |
| Blue and Yellow Arcade Buttons (from previous year) | Actual = 0.985" |
| Large Red/Green LED (in carrier) | Actual = 0.538 |
| Potentiometer | 5/16 Mounting Hole |
| Small LEDs (in carrier) | Actual = 0.231" |
| LED Bar Graph | Actual = 0.497" x 0.996" square |
| Large Toggle Switches | 0.472" Mounting Hole |
| Large Round Arcade Pushbutton | 0.97" Mounting Hole, Button Size = 1.76" Diameter |
| Large Square Arcade Pushbutton | 0.97 Mounting Hole, Button Size = 1.31" Square |
| Red/Black Arcade Pushbutton | 1.13" Mounting Hole |
| Red/Black Smaller Pushbutton | Actual = 0.435" |
