2011:Drivetrain 1.16: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
(New page: = Attendance = '''Start time: ''' '''End time: ''' '''Members present: ''' '''Members Attending Next Meeting: ''' = Tasks Completed = *task **sub-task **sub-task *task = Tasks In Pr...) |
Mechanical1 (talk | contribs) No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
= Attendance = | = Attendance = | ||
'''Start time: ''' | '''Start time: 10:00''' | ||
'''End time: ''' | '''End time: ''' | ||
'''Members present: ''' | '''Members present: Mo,Matt, Ben, Mr Cavaliere''' | ||
'''Members Attending Next Meeting: ''' | '''Members Attending Next Meeting: Same?''' | ||
= Tasks Completed = | = Tasks Completed = | ||
* | *Fabricated 16 corner brackets for chassis | ||
** | *Cut 3/4" Plywood boards for front and rear bumpers<br> | ||
* | *Gathered bumper mounting hardware<br> | ||
* | *Made 1/2 in round spacers for mounting transmission plus extras<br> | ||
*Worked on CAD design<br> | |||
= Tasks In Progress = | = Tasks In Progress = | ||
* | *CAD Design | ||
** | *Need 3/4" plywood by 5" by 37 1/4" for side bumpers , need 2 pieces | ||
** | *Purchase 3/8 16 t-nuts to have as spares | ||
*Drill holes in corner brackets | |||
*Cut front and read aluminum channels - need to field check exact length between 27 and 27 1/4. | |||
= Tasks to Complete = | = Tasks to Complete = | ||
* | *Assemble 4 omni wheels and hubs and sprockets | ||
* | *Assemble traction wheels with hubs and sprockets | ||
* | *Check to make sure we have epoxy or Gorilla glue. | ||
* | *For traction wheels, method is rivet one end first, do trial fit, stretch, roll around, a couple of times. Get length cut. | ||
*glue, and wrap tread, drill the two remaining rivet holes. Make sure tread is seated all around. | |||
*Determine where to mount bumpers either through frame rail channels or make brackets? | |||
*Need to buy bolts for bumpers, if we go through frame rail it will be 3/8" -16 x 2.5 | |||
* | |||
* | |||
* | |||
Latest revision as of 19:37, 16 January 2011
Attendance
Start time: 10:00
End time:
Members present: Mo,Matt, Ben, Mr Cavaliere
Members Attending Next Meeting: Same?
Tasks Completed
- Fabricated 16 corner brackets for chassis
- Cut 3/4" Plywood boards for front and rear bumpers
- Gathered bumper mounting hardware
- Made 1/2 in round spacers for mounting transmission plus extras
- Worked on CAD design
Tasks In Progress
- CAD Design
- Need 3/4" plywood by 5" by 37 1/4" for side bumpers , need 2 pieces
- Purchase 3/8 16 t-nuts to have as spares
- Drill holes in corner brackets
- Cut front and read aluminum channels - need to field check exact length between 27 and 27 1/4.
Tasks to Complete
- Assemble 4 omni wheels and hubs and sprockets
- Assemble traction wheels with hubs and sprockets
- Check to make sure we have epoxy or Gorilla glue.
- For traction wheels, method is rivet one end first, do trial fit, stretch, roll around, a couple of times. Get length cut.
- glue, and wrap tread, drill the two remaining rivet holes. Make sure tread is seated all around.
- Determine where to mount bumpers either through frame rail channels or make brackets?
- Need to buy bolts for bumpers, if we go through frame rail it will be 3/8" -16 x 2.5
