Latest revision as of 19:40, 1 February 2011

Attendance

Start time:

End time:

Members present:

Members Attending Next Meeting:

Drive train is complete with wheels, spacers and chain tensioned. 3/4" wood cut for bumpers. Front and rear pieces cut 5" high by 28.5", side pieces cut 5" high by 37". Mounting points are in the center of the channel frame 3/8" dia holes. Bottom edge of the wood is 1.375" off the floor.
- Using oversize channel (1.25" ID) sections as capture the frame channel and act as washers. These sections stay with the bumpers and add no weight to the robot.
- sub-task
task

anchor the "T" nuts in the wood and glue the pool noodles
- Front and rear have not been drilled waiting for final arm achcor points to be determined
- sub-task
task

@@ Line 1: / Line 1: @@
-= Attendance =
+= Attendance  =
-'''Start time: '''
+'''Start time:'''
-'''End time: '''
+'''End time:'''
-'''Members present: '''
+'''Members present:'''
-'''Members Attending Next Meeting: '''
+'''Members Attending Next Meeting:'''
-= Tasks Completed =
+= Tasks Completed  =
-*task
+*Drive train is complete with wheels, spacers and chain tensioned.&nbsp;&nbsp;3/4" wood cut for bumpers.&nbsp; Front and rear pieces cut 5" high by 28.5", side pieces cut 5" high by 37".&nbsp; Mounting points are in the&nbsp;center of the channel frame&nbsp;3/8" dia holes.&nbsp; Bottom edge of the wood is 1.375" off the floor.
-**sub-task
+**Using oversize channel (1.25" ID) sections as capture the frame channel and act as washers.&nbsp; These sections stay with the bumpers and add no weight to the robot.&nbsp;
 **sub-task
 *task
-= Tasks In Progress =
+= Tasks In Progress  =
 *task
 **sub-task
 **sub-task
 *task
-= Tasks to Complete =
+= Tasks to Complete  =
-*task
+*anchor the "T" nuts in the wood and glue the pool noodles
-**sub-task
+**Front and rear have not been drilled waiting for final arm achcor points to be determined
 **sub-task
 *task
-= Materials Needed =
+= Materials Needed  =
 *task
 **sub-task
 **sub-task
 *task