2009:Robot Design Details: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Leadership (talk | contribs) (Removed "Need to have made" parts as they are all made) |
No edit summary |
||
| Line 48: | Line 48: | ||
*Two conveyors opposite each other, working together to move balls from ball intake and/or below the ball hopper up to the upper ball ejector/hopper entry point. | *Two conveyors opposite each other, working together to move balls from ball intake and/or below the ball hopper up to the upper ball ejector/hopper entry point. | ||
*Powered by two independent motors (RS-545 Banebots motors with [http://banebots.com/pc/MP-36XXX-545/MP-36025-545 25:1 reduction gearboxes]) | *Powered by two independent motors (RS-545 Banebots motors with [http://banebots.com/pc/MP-36XXX-545/MP-36025-545 25:1 reduction gearboxes]) | ||
* | *Sensors: 42SMR-7100 Reciever and 42SML-7100 Source | ||
*Jaguar speed controller | *Jaguar speed controller | ||
*Sensor to detect that conveyor is full | *Sensor to detect that conveyor is full | ||
<br> | <br> | ||
== Upper Ball Ejector == | == Upper Ball Ejector == | ||
Revision as of 04:26, 14 January 2009
Main Robot Design
General layout design of the robot, Dimensions ARE NOT exact.
Drivetrain
- 4-wheel drive
- Banebots Transmissions
- 4 2.5" CIM motors
- Victor 884 [Drive] Speed Controllers
- Fixed wheels (slip-style steering)
- Banebots encoders on each wheel (http://banebots.com/pc/ELECTRONICS/EN-G0561-KT) -- mounted at transmission outputs.
- 27.25” LONG x 37.25” WIDE
- Rear wheel axis at 5.625 from most rear surfaces (adjustable down to 4.625 corner brace regime permitting)
- Front wheel axis at 11.625 from front most surfaces (adjustable ± 2.00”)
- Still need to determine a few hardware items but I think we could use a few PEM fasteners to further minimize fastener system weight
- We will need to design a few spacers “on the fly” as we determine the best approach while building
- The 6-hole patterns in the wheels need to be tapped for 10-32 Depth TBD
- Need to add the stiffener element between the wheels (1/side 1”x1” ext. Al stock is light and will work well and can be welded)
- Need to cut necessary smaller frame elements from stock
- Need to design in provisions for front “dummy wheels” biased 1/8” up for roll over protection
Lower Ball Collector
- Is now part of the front conveyor
Ball Hopper
- Open top entry for human player introduction
- Entry from conveyor at top of robot; entry controlled by upper ejector
- Exit is a "trap door" at the bottom of the hopper down to the area behind the lower ball collector and at the base of the conveyor system.
- Trap door and Lower collection blocker powered by Nippon Denso Window motor (possibly a rack & pinion arrangement?)
- Two Limit Switches sensors to tell when door is in open/closed position
- Jaguar speed controller
Ball Conveyor
- Two conveyors opposite each other, working together to move balls from ball intake and/or below the ball hopper up to the upper ball ejector/hopper entry point.
- Powered by two independent motors (RS-545 Banebots motors with 25:1 reduction gearboxes)
- Sensors: 42SMR-7100 Reciever and 42SML-7100 Source
- Jaguar speed controller
- Sensor to detect that conveyor is full
Upper Ball Ejector
- Spinning ejector directs, based on direction, balls out of robot or in to hopper entry point.
- Powered by Fischer Price 00968-2910 motor with plastic gearbox removed and AndyMark 67:1 Gearbox added
- Jaguar speed controller
