2015:Lifter Subteam: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Programming (talk | contribs) No edit summary |
Programming (talk | contribs) No edit summary |
||
| Line 11: | Line 11: | ||
Stabilizing Mechanism must be mounted near the top of the Lifter | Stabilizing Mechanism must be mounted near the top of the Lifter | ||
'''Specifications:''' | '''Required Specifications:''' | ||
Gripper Must move to a max height of slightly over 5 feet and as low as 10 inches from the ground (NOT FRAME) | Gripper Must move to a max height of slightly over 5 feet and as low as 10 inches from the ground (NOT FRAME) | ||
Less than 36 pounds | |||
Able to lift at minimum 41.9 pounds and a maximum of 57.5 Pounds | |||
Revision as of 14:26, 10 January 2015
General Summary:
Uses Chain to lift car along rail.
Grippers are fixed on car and slide up and down rail.
2013 Design is being used as a reference point for design.
Weight Limit set at integration: 36 Pounds. Current Estimate: 36 Pounds
Stabilizing Mechanism must be mounted near the top of the Lifter
Required Specifications:
Gripper Must move to a max height of slightly over 5 feet and as low as 10 inches from the ground (NOT FRAME)
Less than 36 pounds
Able to lift at minimum 41.9 pounds and a maximum of 57.5 Pounds
