2026:Game Piece: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Mechanical1 (talk | contribs) No edit summary |
Mechanical1 (talk | contribs) No edit summary |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
*Material we used for the fuel was successful | *Material we used for the fuel was successful | ||
*Started new design to fit the correct height | *Started new design to fit the correct height | ||
1/18/26 - Intake: | |||
Accomplished Today | |||
*CADed multiple intake designs with the correct bumper height | |||
*ran into issues with the width of the intake<br> | |||
*did work on geometry for future designs | |||
1/20/26 - Intake: | |||
Accomplished today (and notes for 1/21/26) | |||
*Geometry needs to be corrected, large dead zone where the ball is not being moved by rollers | |||
*Width issue resolved (for now) | |||
*worked on eliminating the need for a support near the bumper | |||
1/22/26- Storage | |||
At integration on Tuesday, it was determined that the storage will take the form of a spindexer. Therefore, the subteam's primary goals for the evening are to decide how the fuel will transition from the intake to the spindexer and to begin CADing the storage mechanism. | |||
1/24/26 - Intake | |||
*after many failed attempts, we have created a succesful 4 roller intake, needs a tiny bit of tweaks but works overall. | |||
Latest revision as of 19:02, 24 January 2026
1/17/26 - Intake:
Accomplished Today
- Tested designs and concluded the bumper is at the wrong height
- Material we used for the fuel was successful
- Started new design to fit the correct height
1/18/26 - Intake:
Accomplished Today
- CADed multiple intake designs with the correct bumper height
- ran into issues with the width of the intake
- did work on geometry for future designs
1/20/26 - Intake:
Accomplished today (and notes for 1/21/26)
- Geometry needs to be corrected, large dead zone where the ball is not being moved by rollers
- Width issue resolved (for now)
- worked on eliminating the need for a support near the bumper
1/22/26- Storage
At integration on Tuesday, it was determined that the storage will take the form of a spindexer. Therefore, the subteam's primary goals for the evening are to decide how the fuel will transition from the intake to the spindexer and to begin CADing the storage mechanism.
1/24/26 - Intake
- after many failed attempts, we have created a succesful 4 roller intake, needs a tiny bit of tweaks but works overall.
