2026:Game Piece

1/17/26 - Intake:

Accomplished Today

• Tested designs and concluded the bumper is at the wrong height
• Material we used for the fuel was successful
• Started new design to fit the correct height

1/18/26 - Intake:

Accomplished Today

• CADed multiple intake designs with the correct bumper height
• ran into issues with the width of the intake
  
• did work on geometry for future designs

1/20/26 - Intake:

Accomplished today (and notes for 1/21/26)

• Geometry needs to be corrected, large dead zone where the ball is not being moved by rollers
• Width issue resolved (for now)
• worked on eliminating the need for a support near the bumper

1/22/26- Storage

At integration on Tuesday, it was determined that the storage will take the form of a spindexer. Therefore, the subteam's primary goals for the evening are to decide how the fuel will transition from the intake to the spindexer and to begin CADing the storage mechanism. 

1/24/26 - Intake

• after many failed attempts, we have created a succesful 4 roller intake, needs a tiny bit of tweaks but works overall.