2009:Electrical Main 1.31.09: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
No edit summary
No edit summary
Line 16: Line 16:
*I think we have enough large gauge wire (#12 and larger), and we have enough #18 wire, and enough smaller wire for PWM cables & sensors.  
*I think we have enough large gauge wire (#12 and larger), and we have enough #18 wire, and enough smaller wire for PWM cables & sensors.  
*sorted through some of the donated parts in the plastic containers.  
*sorted through some of the donated parts in the plastic containers.  
*maximum height from side electrical board to outer edge of robot is 6.525".  Tallest component on board is 3.713"
*task
*task


Line 24: Line 25:
'''Tasks In Progress:'''<br>  
'''Tasks In Progress:'''<br>  


*task
*fabricate protective cover for side electrical board
*task
*task


Line 35: Line 36:
*we need #14 AWG wire, red and black (we only have one spool of white)  
*we need #14 AWG wire, red and black (we only have one spool of white)  
*we need #16 AWG red wire (we have plenty of black)  
*we need #16 AWG red wire (we have plenty of black)  
*task
*we need more Lexan for side panel cover - - - 1/16" thick, at least 35" x 28"


<br>  
<br>  


----
----

Revision as of 10:51, 31 January 2009


1.31.2009

Start time: 10:00am

End time:

Members present: Sean, Mike H., Dave Oranges, Rika, Victor


Tasks Completed:

  • sorted wire by size to see if we need anything.  Also separated into three boxes - small, medium and large wire - so it's easier to find what we need.
  • I think we have enough large gauge wire (#12 and larger), and we have enough #18 wire, and enough smaller wire for PWM cables & sensors.
  • sorted through some of the donated parts in the plastic containers.
  • maximum height from side electrical board to outer edge of robot is 6.525".  Tallest component on board is 3.713"
  • task



Tasks In Progress:

  • fabricate protective cover for side electrical board
  • task



Tasks to Complete:

  • we need #14 AWG wire, red and black (we only have one spool of white)
  • we need #16 AWG red wire (we have plenty of black)
  • we need more Lexan for side panel cover - - - 1/16" thick, at least 35" x 28"