|
|
| Line 2: |
Line 2: |
|
| |
|
|
| |
|
| == This is a sample entry for an Engineering Notebook Entry - copy and paste this whole section to add a new entry ==
| | [[Mechanical 1.15.2009]] |
|
| |
|
| [[Image:Logo.jpg]] | | [[Mechanical 1.14.2009]] |
| ----
| |
|
| |
|
| '''1.15.2008'''
| | [[Mechanical 1.13.2009]] |
|
| |
|
| '''Start time:''' 10:00
| | [[Mechanical 1.12.2009]] |
| | |
| '''End time:''' 20:00
| |
| | |
| '''Members present:''' Eric, Jeff, Shauna, Cristian, Mike
| |
| | |
| | |
| '''Tasks completed:'''
| |
| | |
| 1.) Gyro code to drive in a straight line, turn arbitrary # degrees in place | |
| | |
| 2.) Need info from drivetrain --[[User:Mechanical1|Mechanical1]] 22:40, 6 January 2009 (UTC)
| |
| | |
| | |
| '''Tasks to complete:'''
| |
| | |
| 1.) Write gyro-based code for turning 180 at the end of the field - 3 different "cases" based on starting position - partially complete as we had a gradual 45 deg. turn working on 1.13 evening
| |
| | |
| | |
| | |
| | |
| ----
| |
| | |
| '''1.14.2008'''
| |
| | |
| '''Start time:''' 10:00
| |
| | |
| '''End time:''' 20:00
| |
| | |
| '''Members present:''' Eric, Jeff, Shauna, Cristian, Mike
| |
| | |
| | |
| '''Tasks completed:'''
| |
| | |
| 1.) Gyro code to drive in a straight line, turn arbitrary # degrees in place
| |
| | |
| 2.) Code to execute multiple autonomous movements one after the other
| |
| | |
| 3.) Defined OI pinout for LEDs and switch inputs
| |
| | |
| 4.) Wired up 2 DB-15s for use with OI LEDs/switches
| |
| | |
| 5.) Got IR board output reading function written
| |
| | |
| | |
| '''Tasks to complete:'''
| |
| | |
| 1.) Write gyro-based code for turning 180 at the end of the field - 3 different "cases" based on starting position - partially complete as we had a gradual 45 deg. turn working on 1.13 evening
| |
| | |
| 2.) Write encoder-based code for driving to the underpass in 'poking' position - partially complete based on Shauna's code, but needs to be integrated with gyro-based 'drive straight' code
| |
| | |
| 3.) Work with mech. team to understand how we need to control arm to keep us in the 80" cylinder. Ugh not again.
| |
| | |
| 4.) Determine 'Robocoach' commands based on the autonomous modes listed in http://penfieldrobotics.com/forum/index.php?topic=1732 and the current capabilities of our robot
| |
| | |
| 5.) Meet Tuesday night right after dinner and review our tasklist/plan for the rest of the season
| |
