2011:Drivetrain 2.1: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
(New page: = Attendance = '''Start time: ''' '''End time: ''' '''Members present: ''' '''Members Attending Next Meeting: ''' = Tasks Completed = *task **sub-task **sub-task *task = Tasks In Pr...)
 
No edit summary
 
Line 1: Line 1:
= Attendance =
= Attendance =


'''Start time: '''
'''Start time:'''


'''End time: '''
'''End time:'''


'''Members present: '''
'''Members present:'''


'''Members Attending Next Meeting: '''
'''Members Attending Next Meeting:'''


= Tasks Completed =
= Tasks Completed =


*task
*Drive train is complete with wheels, spacers and chain tensioned.  3/4" wood cut for bumpers.  Front and rear pieces cut 5" high by 28.5", side pieces cut 5" high by 37".  Mounting points are in the center of the channel frame 3/8" dia holes.  Bottom edge of the wood is 1.375" off the floor.
**sub-task
**Using oversize channel (1.25" ID) sections as capture the frame channel and act as washers.  These sections stay with the bumpers and add no weight to the robot. 
**sub-task
**sub-task
*task
*task


= Tasks In Progress =  
= Tasks In Progress =


*task
*task  
**sub-task
**sub-task  
**sub-task
**sub-task
*task
*task


= Tasks to Complete =
= Tasks to Complete =


*task
*anchor the "T" nuts in the wood and glue the pool noodles
**sub-task
**Front and rear have not been drilled waiting for final arm achcor points to be determined
**sub-task
**sub-task
*task
*task


= Materials Needed =
= Materials Needed =


*task
*task  
**sub-task
**sub-task  
**sub-task
**sub-task
*task
*task

Latest revision as of 19:40, 1 February 2011

Attendance

Start time:

End time:

Members present:

Members Attending Next Meeting:

Tasks Completed

  • Drive train is complete with wheels, spacers and chain tensioned.  3/4" wood cut for bumpers.  Front and rear pieces cut 5" high by 28.5", side pieces cut 5" high by 37".  Mounting points are in the center of the channel frame 3/8" dia holes.  Bottom edge of the wood is 1.375" off the floor.
    • Using oversize channel (1.25" ID) sections as capture the frame channel and act as washers.  These sections stay with the bumpers and add no weight to the robot. 
    • sub-task
  • task

Tasks In Progress

  • task
    • sub-task
    • sub-task
  • task

Tasks to Complete

  • anchor the "T" nuts in the wood and glue the pool noodles
    • Front and rear have not been drilled waiting for final arm achcor points to be determined
    • sub-task
  • task

Materials Needed

  • task
    • sub-task
    • sub-task
  • task