2009:Mechanical 1 - 1.14.09: Difference between revisions
From 1511Wookiee
Jump to navigationJump to search
Mechanical1 (talk | contribs) No edit summary |
Mechanical1 (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
1.14.2009 | 1.14.2009 | ||
'''Start time: '''6:30<br> | '''Start time: '''6:30<br> | ||
'''End time: '''9:00<br> | '''End time: '''9:00<br> | ||
'''Members present: '''Alex Wolf, <br> | '''Members present: '''Alex Wolf, <br> | ||
---- | ---- | ||
'''Tasks Completed:''' <br> | '''Tasks Completed:''' <br> | ||
*Designed a pulley<br> | *Designed a pulley<br> | ||
*Attempted to import motor CAD but mostly unsuccessful <br> | *Attempted to import motor CAD but mostly unsuccessful <br> | ||
*Designed bearing block<br> | *Designed bearing block<br> | ||
*Selected Drvie conveyor belt<br> | *Selected Drvie conveyor belt<br> | ||
NOT FINAL - Conveyor Section<br> | NOT FINAL - Conveyor Section<br> | ||
- Pitch Diameter: 2.875in<br> | - Pitch Diameter: 2.875in<br> | ||
| Line 24: | Line 24: | ||
- Belt length: 34.5in (McMaster Carr Number: 6190k44 (3L 345))<br> | - Belt length: 34.5in (McMaster Carr Number: 6190k44 (3L 345))<br> | ||
*Completed rough out of the overall frame in Inventor. | |||
*Added video to sumgmug of final prototype testing... picking and delivery mechanism appear will work well in prototype. | |||
*Performed drive torque test on prototype in lab. Results were it requires approximately 15 in pounds to drive the v-belts of our cured prototype with a huge amount of frictional resistance with steel shafts running on wood holes with very crude alignment.<br> | |||
---- | ---- | ||
'''Tasks In Progress:'''<br> | |||
'''Tasks In Progress:'''<br> | |||
*Motor Mounting in CAD<br> | *Motor Mounting in CAD<br> | ||
*Conveyor details<br> | *Conveyor details<br> | ||
<br> | <br> | ||
---- | ---- | ||
'''Tasks to Complete: '''<br> | '''Tasks to Complete: '''<br> | ||
**Motor Mounting in CAD<br> | **Motor Mounting in CAD<br> | ||
*Conveyor details | *Conveyor details | ||
<br> | <br><br> | ||
---- | ---- | ||
Revision as of 22:11, 14 January 2009
1.14.2009
Start time: 6:30
End time: 9:00
Members present: Alex Wolf,
Tasks Completed:
- Designed a pulley
- Attempted to import motor CAD but mostly unsuccessful
- Designed bearing block
- Selected Drvie conveyor belt
NOT FINAL - Conveyor Section
- Pitch Diameter: 2.875in
- Center Line Distance: 12.75in
- Belt length: 34.5in (McMaster Carr Number: 6190k44 (3L 345))
- Completed rough out of the overall frame in Inventor.
- Added video to sumgmug of final prototype testing... picking and delivery mechanism appear will work well in prototype.
- Performed drive torque test on prototype in lab. Results were it requires approximately 15 in pounds to drive the v-belts of our cured prototype with a huge amount of frictional resistance with steel shafts running on wood holes with very crude alignment.
Tasks In Progress:
- Motor Mounting in CAD
- Conveyor details
Tasks to Complete:
- Motor Mounting in CAD
- Motor Mounting in CAD
- Conveyor details
Images & Additional Updates:
(Use the upload file button on the toolbox to the left to upload the file, then insert an image using the button above. Sizing can be done using the length/width pixel size)
