2009:Electrical Main 1.31.09

---

1.31.2009

Start time: 10:00am

End time:

Members present: Sean, Mike H., Dave Oranges, Rika, Crystal, Victor

---

Tasks Completed:

• sorted wire by size to see if we need anything.  Also separated into three boxes - small, medium and large wire - so it's easier to find what we need.
  
• I think we have enough large gauge wire (#12 and larger), and we have enough #18 wire, and enough smaller wire for PWM cables & sensors.
• sorted through some of the donated parts in the plastic containers.
• maximum height from side electrical board to outer edge of robot is 6.525".  Tallest component on board is 3.713"
• designed protective cover for side panel in Inventor - folded lexan to be velcro'ed to side panel.
• task

---

Tasks In Progress:

• fabricate protective cover for side electrical board
• task

---

Tasks to Complete:

• we need #14 AWG wire, red and black (we only have one spool of white)
• we need #16 AWG red wire (we have plenty of black)
• we need more Lexan for side panel cover - - - 1/16" thick, at least 34" x 28"

---