Preseason Deploy Code

From 1511Wookiee
Revision as of 20:46, 28 November 2021 by Heydowns (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

This assumes you have the project opened in 'FRC VS Code' and have succesfully built it.

  1. Make sure the robot is completely powered on
  2. Make sure your PC's network is connected to the Robot - make sure your Wifi is connected to 1511-testboard wifi network
  3. Open Command Palette: either use Ctrl+Shift+P, click the 'W' menu in top-right corner, or select from 'View' menu
  4. Select 'WPILib: Deploy Robot Code'
  5. You will only get an error if it fails to find the robot or download.
Retrieved from "https://wiki.penfieldrobotics.com/wiki/index.php?title=Preseason_Deploy_Code&oldid=11214"