2009:Electrical Main 1.17.2009
From 1511Wookiee
Jump to navigationJump to search
1.17.2009
Start time: 11:00
End time:
Members present: Michael H., Dave(Apples), Dave(oranges), Rika, Victor, Sean
Tasks Completed:
- Investigates Shaft Encoder - US Digital E4P-250-250-D-D-D-B
-Mounts on 1/4" shaft(press on, no set screw required)
-Mounts with 3-48 screws on flat plate or motor housing
-Needs +5 V supply, 18 MA for LED, 5 MA, for detector
-Output V high - 2.4, low - 0.4, with 2.7k ohms Pull-up resistor
-250 counts per revolution(CPR)
-Price - $22.95 - 1, $18.04 - 10
- Found a banner sensor. Reciever specs are as follows:
- Part number: Q10RP6R - Q10 Series: Receiver
- Range: 1.8 m
- Input: 10-30V dc
- Output: Dark Operate (Means that the sensor activates when the beam is broken)
- PNP
- Cable length: 2 m (6.5 ft) - Finally re-made the BOM File:BOM
Tasks In Progress:
- task
- task
Tasks to Complete:
- task
- task
Images & Additional Updates:
(Use the upload file button on the toolbox to the left to upload the file, then insert an image using the button above. Sizing can be done using the length/width pixel size)