2009:Electrical Main 1.17.2009

1.17.2009

Start time: 11:00

End time:

Members present: Michael H., Dave(Apples), Dave(oranges), Rika, Victor, Sean

---

Tasks Completed:

• Investigates Shaft Encoder - US Digital E4P-250-250-D-D-D-B

      -Mounts on 1/4" shaft(press on, no set screw required)

      -Mounts with 3-48 screws on flat plate or motor housing

      -Needs +5 V supply, 18 MA for LED, 5 MA, for detector

      -Output V high - 2.4, low - 0.4, with 2.7k ohms Pull-up resistor

      -250 counts per revolution(CPR)

      -Price - $22.95 - 1, $18.04 - 10

• Found a banner sensor. Reciever specs are as follows:
  - Part number: Q10RP6R - Q10 Series: Receiver
  - Range: 1.8 m
  - Input: 10-30V dc
  - Output: Dark Operate (Means that the sensor activates when the beam is broken)
  - PNP
  - Cable length: 2 m (6.5 ft)
  - Price: $36.80
  
• Finally re-made the BOM File:BOM

---

Tasks In Progress:

• task
• task

---

Tasks to Complete:

• task
• task

---

Images & Additional Updates:

(Use the upload file button on the toolbox to the left to upload the file, then insert an image using the button above.  Sizing can be done using the length/width pixel size)