2009:Mechanical 1 - 1.14.09

1.14.2009

Start time: 6:30

End time: 9:00

Members present: Alex Wolf,

---

Tasks Completed:

• Designed a pulley
  
• Attempted to import motor CAD but mostly unsuccessful
  
• Designed bearing block
  
• Selected Drvie conveyor belt
  

NOT FINAL - Conveyor Section

                  - Pitch Diameter: 2.875in

                  - Center Line Distance: 12.75in

                  - Belt length: 34.5in (McMaster Carr Number: 6190k44 (3L 345))

• Completed rough out of the overall frame in Inventor.
• Added video to sumgmug of final prototype testing... picking and delivery mechanism appear will work well in prototype.
• Performed drive torque test on prototype in lab. Results were it requires approximately 15 in pounds to drive the v-belts of our cured prototype with a huge amount of frictional resistance with steel shafts running on wood holes with very crude alignment.
  

---

Tasks In Progress:

• Motor Mounting in CAD
  
• Conveyor details
  

---

Tasks to Complete:

• • Motor Mounting in CAD
    
• Conveyor details

---

Images & Additional Updates:

(Use the upload file button on the toolbox to the left to upload the file, then insert an image using the button above.  Sizing can be done using the length/width pixel size)