2010:Controls 02.17

From 1511Wookiee
Revision as of 18:05, 17 February 2010 by ElectricalMain (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

2/17/09 - Karen F, Rachael, Crystal, Karen W


Looked at MC9s08 code, decided to use 10k pull downs on wheel and slider.

Karen & Karen soldered 10k pull downs J1 - 4 to  J1-1 (gnd). J2 -4 to J2-1 (gnd)

board was not cleaned up & screws were not painted.