2011:Drivetrain 1.14

Attendance

Start time: 6:00

End time: 9:00

Members present: Mo, Matt, Ben, Paul

Members Attending Next Meeting: Hopefully the same

Tasks Completed

• Built up two complete Cimple box transmissions with Cim motors with grease.  1 : 4.6667 ratio
  
  • Finished up basic frame design  currently 27.25" width to the frame x 37"
    
  • Currently using dual 12T off Cimple box to 30T for 1 : 2.5 ratio   Total drive ratio 1 : 11.7    Max speed 12.87 FPS   112.9 pushing force.
    
• Larry ordered balance of drive train parts
  
• Current model has wheel to sprocket dimension larger than desired.  Need to resolve.
  

Tasks In Progress

• Verify what other parts are needed for chassis.
  
• Mr. Cavaliere will order wheel parts and transmissions.
  

Tasks to Complete

• Agree on chain routing and final gear to wheel spacing.
  
• Start cutting and assembling chassis rails.

Materials Needed

• Order 1/2" diameter carraige bolts X 7 long.  Need 6 min, should get 10 or 12.
  • sub-task
  • sub-task
• task