2011:Controls 2.5

From 1511Wookiee
Revision as of 14:41, 5 February 2011 by ElectricalControls (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Attendance

Start time: 11AM

End time:

Members present: Crystal, Eric, Gafei

Members Attending Next Meeting:

Tasks Completed

  • Wiring of the switches, LEDs, and resistors were completed for the swtitch "matrix."
    • LED resistance values were calculated for each specific LED color. (Vin - Vled / 20mA) = Rled ) (Vin is 5V from the cypress board)
  • The autonomous keypad was wired.
  • Preliminary mapping and emulation of a HID device was implemented through the cypress board.

Tasks In Progress

  • Mapping of the I/O's to the cypress board is in progress.

Tasks to Complete

  • Determine where to add potentiometer holes on the paper layout.
    • Wire the LCD panel and make sure it works.
    • Get the autonomus keypad to work correctly.

Materials Needed

  • A sheet metal layout is in going to be needed.
    • Preset switches need to be wired.