2012:Shooter and Collector Camera

1/15: tested white and red led reflections

• Target
  • 26 feet from camera
  • OSB; tape is black duct tape (note: not enough tape to do inside completely
• Light Source
  • Round light with several red leds (something from a prior year)
  • Mini-led flashlight (red from toolbox), has 5 wihtie leds
• Results
  • the red led gave off a little red cast (each time we connected power, a different number of leds lit up)
  • the white leds reflected the best
  • concerned the white leds might be too bright for drivers on other alliance
• Images

1/19: tested Infrared lights reflecting off reflective tape for the camera

• Target
  • about 4 feet from camera (we did not measure it)
  • poly; outer tape is black duct tape and inner tape is blue gaffers tape; in the middle of the target, the plastic protection is on the back; area outside the black tape has the plastic protection on both sides
• Light Source
  • Tried infared LED Night light, Model # IR045
  • Mini-led flashlight (red from toolbox), has 5 wihtie leds
• Results
  • camera can infrared light, but no reflection on tape (you can also see reflect on the plastic)
  • Images
    • Target with no light source
    • Target with infrared light
    • Target with flashlight