2016:Lifter

1. The Plan

We have come to the conclusion that the best method of scaling the castle near the end of the match is using a telescoping arm to latch onto the bar and then lift with the arm.  

2.  To Do

• Figure out the measurements that are alotted to the scaler team.
• Collaborate with the drivetrain team to ensure that those measurements will work well.
• Design the telescope nesting arm.
• Finish CAD work.
• Select motors 

Scaler Pivot Arm:

Use Versaplanetary 100:1

12 tooth sprocket on motor shaft driving a 42 tooth sprocket

3.  Update 1/26/16

​3.1  What we're working on

• Design rollers/stops for the arm stages
• Design lightning holes
• Design motor mountings and figure out how to attach to the drivebase
• Send parts to chamtek
• Finish CAD work

3.2