2010:Field/Crate: Difference between revisions
FieldCrate (talk | contribs) No edit summary |
FieldCrate (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
== This is the Field/Crate Subteam's Engineering Notebook == | == This is the Field/Crate Subteam's Engineering Notebook == | ||
'''[[Field/Crate 1.12.09|Field/Crate 1.13.09]]''' | |||
'''[[Field/Crate 1.11.09|Field/Crate 1.11.09]]''' | |||
'''[[Field/Crate 1.10.09|Field/Crate 1.10.09]]''' | |||
'''[[Field/Crate 1.08.09|Field/Crate 1.08.09]]''' | |||
'''[[Field/Crate 1.07.09|Field/Crate 1.07.09]]''' | |||
'''[[Field/Crate 1.06.09|Field/Crate 1.06.09]]''' | |||
'''1.06.2009''' | '''1.06.2009''' | ||
Line 9: | Line 23: | ||
'''Members present:''' Amy, Theo, Curtis, Karen | '''Members present:''' Amy, Theo, Curtis, Karen | ||
<br> '''Tasks completed:''' | <br>'''Tasks completed:''' | ||
1.) Cut small PVC for outside uprights of trailer | 1.) Cut small PVC for outside uprights of trailer | ||
Line 17: | Line 31: | ||
3.) Began sketching out measurements on plywood sheet | 3.) Began sketching out measurements on plywood sheet | ||
<br> | <br> | ||
'''Tasks to complete:''' | '''Tasks to complete:''' | ||
Line 27: | Line 41: | ||
3.) Glue/assemble trailers | 3.) Glue/assemble trailers | ||
<br> | <br> | ||
---- | ---- | ||
Line 37: | Line 51: | ||
End time: 9:00 | End time: 9:00 | ||
Members present: Amy, Theo, Kevin<br> | Members present: Amy, Theo, Kevin<br> | ||
<br>Tasks completed: | <br>Tasks completed: | ||
1.) Finished cutting large PVC for center of trailer<br> | 1.) Finished cutting large PVC for center of trailer<br> | ||
2.) Cut half of hexagonal luan plywood bases needed (6/12)<br> | 2.) Cut half of hexagonal luan plywood bases needed (6/12)<br> | ||
3.) Cut lots of little 2x4 pieces for bumper supports<br> | 3.) Cut lots of little 2x4 pieces for bumper supports<br> | ||
4.) Sketched out bumper plywood measurements & cut lines | 4.) Sketched out bumper plywood measurements & cut lines | ||
Line 51: | Line 65: | ||
<br>Tasks to complete: | <br>Tasks to complete: | ||
1.) Cut other half of luan plywood bases<br> | 1.) Cut other half of luan plywood bases<br> | ||
2.) Cut out bumper plywood<br> | 2.) Cut out bumper plywood<br> | ||
3.) Glue/assemble trailers | 3.) Glue/assemble trailers | ||
<br> | <br> | ||
---- | ---- | ||
Line 67: | Line 81: | ||
End time: 9:00 | End time: 9:00 | ||
Members present: Amy, Theo, Curtis<br> | Members present: Amy, Theo, Curtis<br> | ||
<br>Tasks completed: | <br>Tasks completed: | ||
1.) Finished cutting hexagonal luan plywood bases<br> | 1.) Finished cutting hexagonal luan plywood bases<br> | ||
2.) Cut metal for trailer tongues<br> | 2.) Cut metal for trailer tongues<br> | ||
3.) Made template for holes to be cut in hexagonal bases<br> | 3.) Made template for holes to be cut in hexagonal bases<br> | ||
<br>Tasks to complete: | <br>Tasks to complete: | ||
1.) Drill/cut holes in 11 other trailer bases<br> | 1.) Drill/cut holes in 11 other trailer bases<br> | ||
2.) Cut out bumper plywood | 2.) Cut out bumper plywood | ||
3.) Glue/assemble trailers <br> | 3.) Glue/assemble trailers <br> | ||
<br> | <br> | ||
---- | ---- | ||
<br> | <br> | ||
'''1.10.2009''' | '''1.10.2009''' | ||
Start time: 10:00<br> | Start time: 10:00<br> | ||
End time: 8:00<br> | End time: 8:00<br> | ||
Members present: Amy, Theo, Karen | Members present: Amy, Theo, Karen | ||
Line 101: | Line 115: | ||
<br>Tasks completed: | <br>Tasks completed: | ||
1.) Cut remaining pvc holes in trailer bases<br> | 1.) Cut remaining pvc holes in trailer bases<br> | ||
2.) Cut out plywood for bumpers<br> | 2.) Cut out plywood for bumpers<br> | ||
3.) Cut out large hole in center of each base<br> | 3.) Cut out large hole in center of each base<br> | ||
4.) Bought 20 sheets of "Regolith" flooring (it is being stored in the autoshop with the overpass and regular floor boards)<br> | 4.) Bought 20 sheets of "Regolith" flooring (it is being stored in the autoshop with the overpass and regular floor boards)<br> | ||
5.) created template for attaching bumper plywood to mounting pieces<br> | 5.) created template for attaching bumper plywood to mounting pieces<br> | ||
<br>Tasks to complete: | <br>Tasks to complete: | ||
1.) Attach bumper plywood to mounting pieces<br> | 1.) Attach bumper plywood to mounting pieces<br> | ||
2.) Cut slots for wheel in bottom bases<br> | 2.) Cut slots for wheel in bottom bases<br> | ||
3.) Cut plywood/polycarbonate for vision targets <br> | 3.) Cut plywood/polycarbonate for vision targets <br> | ||
4.) Glue/assemble trailers | 4.) Glue/assemble trailers | ||
<br> | <br> | ||
---- | ---- | ||
Line 127: | Line 141: | ||
<br> | <br> | ||
'''1.10.2009''' | '''1.10.2009''' | ||
Start time: 10:00 | Start time: 10:00 | ||
End time: 4:00<br> | End time: 4:00<br> | ||
Line 135: | Line 149: | ||
Members present: Amy, Theo<br> | Members present: Amy, Theo<br> | ||
<br>Tasks completed: | <br>Tasks completed: | ||
1.) Drilled mounting holes/cut wheel slots in trailer bases<br> | 1.) Drilled mounting holes/cut wheel slots in trailer bases<br> | ||
Line 145: | Line 159: | ||
4.) Found bearings for trailer wheels, attached one wheel to axle and mounting piece<br> | 4.) Found bearings for trailer wheels, attached one wheel to axle and mounting piece<br> | ||
<br>Tasks to complete: | <br>Tasks to complete: | ||
1.) Buy fabric for bumpers<br> | 1.) Buy fabric for bumpers<br> | ||
Line 151: | Line 165: | ||
2.) Make bumpers<br> | 2.) Make bumpers<br> | ||
3.) Cut plywood/polycarbonate for vision targets | 3.) Cut plywood/polycarbonate for vision targets | ||
4.) Glue/assemble trailers <br> | 4.) Glue/assemble trailers <br> |
Revision as of 08:53, 12 January 2009
This is the Field/Crate Subteam's Engineering Notebook
1.06.2009
Start time: 6:45
End time: 8:45
Members present: Amy, Theo, Curtis, Karen
Tasks completed:
1.) Cut small PVC for outside uprights of trailer
2.) Began to cut large PVC for center column
3.) Began sketching out measurements on plywood sheet
Tasks to complete:
1.) Finish cutting large PVC for center column
2.) Sketch and cut plywood for base
3.) Glue/assemble trailers
1.07.2009
Start time: 6:30
End time: 9:00
Members present: Amy, Theo, Kevin
Tasks completed:
1.) Finished cutting large PVC for center of trailer
2.) Cut half of hexagonal luan plywood bases needed (6/12)
3.) Cut lots of little 2x4 pieces for bumper supports
4.) Sketched out bumper plywood measurements & cut lines
Tasks to complete:
1.) Cut other half of luan plywood bases
2.) Cut out bumper plywood
3.) Glue/assemble trailers
1.08.2009
Start time: 6:20
End time: 9:00
Members present: Amy, Theo, Curtis
Tasks completed:
1.) Finished cutting hexagonal luan plywood bases
2.) Cut metal for trailer tongues
3.) Made template for holes to be cut in hexagonal bases
Tasks to complete:
1.) Drill/cut holes in 11 other trailer bases
2.) Cut out bumper plywood
3.) Glue/assemble trailers
1.10.2009
Start time: 10:00
End time: 8:00
Members present: Amy, Theo, Karen
Tasks completed:
1.) Cut remaining pvc holes in trailer bases
2.) Cut out plywood for bumpers
3.) Cut out large hole in center of each base
4.) Bought 20 sheets of "Regolith" flooring (it is being stored in the autoshop with the overpass and regular floor boards)
5.) created template for attaching bumper plywood to mounting pieces
Tasks to complete:
1.) Attach bumper plywood to mounting pieces
2.) Cut slots for wheel in bottom bases
3.) Cut plywood/polycarbonate for vision targets
4.) Glue/assemble trailers
1.10.2009
Start time: 10:00
End time: 4:00
Members present: Amy, Theo
Tasks completed:
1.) Drilled mounting holes/cut wheel slots in trailer bases
2.) Attached bumper plywood to mounts
3.) Cut pool noodles for one trailer
4.) Found bearings for trailer wheels, attached one wheel to axle and mounting piece
Tasks to complete:
1.) Buy fabric for bumpers
2.) Make bumpers
3.) Cut plywood/polycarbonate for vision targets
4.) Glue/assemble trailers