2010:Field/Crate: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
== This is the Field/Crate Subteam's Engineering Notebook  ==
== This is the Field/Crate Subteam's Engineering Notebook  ==


'''[[Field/Crate 1.12.09|Field/Crate 1.13.09]]'''


'''[[Field/Crate 1.12.09|Field/Crate 1.13.09]]'''
'''[[Field/Crate 1.11.09|Field/Crate 1.11.09]]'''  


'''[[Field/Crate 1.11.09|Field/Crate 1.11.09]]'''
'''[[Field/Crate 1.10.09|Field/Crate 1.10.09]]'''  


'''[[Field/Crate 1.10.09|Field/Crate 1.10.09]]'''
'''[[Field/Crate 1.08.09|Field/Crate 1.08.09]]'''  


'''[[Field/Crate 1.08.09|Field/Crate 1.08.09]]'''
'''[[Field/Crate 1.07.09|Field/Crate 1.07.09]]'''  


'''[[Field/Crate 1.07.09|Field/Crate 1.07.09]]'''
'''[[Field/Crate 1.06.09|Field/Crate 1.06.09]]'''  


'''[[Field/Crate 1.06.09|Field/Crate 1.06.09]]'''
<br><br>
 
 
'''1.06.2009'''
 
'''Start time:''' 6:45
 
'''End time:''' 8:45
 
'''Members present:''' Amy, Theo, Curtis, Karen
 
<br>'''Tasks completed:'''
 
1.) Cut small PVC for outside uprights of trailer
 
2.) Began to cut large PVC for center column
 
3.) Began sketching out measurements on plywood sheet
 
<br>
 
'''Tasks to complete:'''
 
1.) Finish cutting large PVC for center column
 
2.) Sketch and cut plywood for base
 
3.) Glue/assemble trailers
 
<br>
 
----
 
'''&nbsp;1.07.2009'''
 
Start time: 6:30
 
End time: 9:00
 
Members present: Amy, Theo, Kevin<br>
 
<br>Tasks completed:
 
1.) Finished cutting large PVC&nbsp;for center of trailer<br>
 
2.) Cut half of hexagonal luan plywood bases needed (6/12)<br>
 
3.) Cut lots of little 2x4 pieces for bumper supports<br>
 
4.) Sketched out bumper plywood measurements &amp; cut lines
 
<br>Tasks to complete:
 
1.) Cut other half of luan plywood bases<br>
 
2.) Cut out bumper plywood<br>
 
3.) Glue/assemble trailers
 
<br>
 
----
 
<br>'''1.08.2009'''
 
Start time: 6:20
 
End time: 9:00
 
Members present: Amy, Theo, Curtis<br>
 
<br>Tasks completed:
 
1.) Finished cutting hexagonal luan plywood bases<br>
 
2.) Cut metal for trailer tongues<br>
 
3.) Made template for holes to be cut in hexagonal bases<br>
 
<br>Tasks to complete:
 
1.) Drill/cut holes in 11 other trailer bases<br>
 
2.) Cut out bumper plywood
 
3.) Glue/assemble trailers <br>
 
<br>
 
----
 
<br>
 
'''1.10.2009'''
 
Start time: 10:00<br>
 
End time: 8:00<br>
 
Members present: Amy, Theo, Karen
 
<br>Tasks completed:
 
1.) Cut remaining pvc holes in trailer bases<br>
 
2.) Cut out plywood for bumpers<br>
 
3.) Cut out large hole in center of each base<br>
 
4.) Bought 20 sheets of "Regolith" flooring (it is being stored in the autoshop with the overpass and regular floor boards)<br>
 
5.) created template for attaching bumper plywood to mounting pieces<br>
 
<br>Tasks to complete:
 
1.) Attach bumper plywood to mounting pieces<br>
 
2.) Cut slots for wheel in bottom bases<br>
 
3.) Cut plywood/polycarbonate for vision targets <br>
 
4.) Glue/assemble trailers
 
<br>
 
----
 
<br>
 
'''1.10.2009'''
 
Start time: 10:00
 
End time: 4:00<br>
 
Members present: Amy, Theo<br>
 
<br>Tasks completed:
 
1.) Drilled mounting holes/cut wheel slots in trailer bases<br>
 
2.) Attached bumper plywood to mounts<br>
 
3.) Cut pool noodles for one trailer<br>
 
4.) Found bearings for trailer wheels, attached one wheel to axle and mounting piece<br>
 
<br>Tasks to complete:
 
1.) Buy fabric for bumpers<br>
 
2.) Make bumpers<br>
 
3.) Cut plywood/polycarbonate for vision targets
 
4.) Glue/assemble trailers <br>

Revision as of 08:57, 12 January 2009