Fabrication

Modeling Tips

Sheetmetal Parts

How to Submit Parts

In order to get parts made a drawing must be completed and the appropriate files must be submitted (see below for drawing and file requirements).  Please create a new line in the table FILES TO BE MADE for each part request and email the proper drawing and required files to aaverill@harris.com.  Any questions, please ask Amy Averill.

Quick Breakdown of Types of Parts/Files Needed

Machined Parts (think parts made from blocks of aluminum with intricate surfaces)

 1) .dwg   

 2) .pdf

 3) .stp

Omax Parts (Sheetmetal - think flat parts with holes, bar stock to be cut to length, sheetmetal that gets bent)

  1) .dwg Do save copy as a autoCAD dwg.file. Must be 2000LT

  2) .pdf

  3)  .dxf Must be 2000LT

See links for what is required in each format and how to save the files.

                                   

---

Files to be made

Date	Requested Item	Requestor	Ordered By/Date	QTY	RX'd
1/27	MSS_003_2012	Alex Wolf	A. Averill 1/30	16
1/30	MSS_007_2012	Alex Wolf	A. Averill 1/30	20
1/30	MSS_008_2012	Alex Wolf	A. Averill 1/30	2
1/30	MSS_010_2012	Alex Wolf	A. Averill 1/30	2
1/30	MSS_013_2012	Alex Wolf	A. Averill 1/30	2
1/30	MSS_015_2012	Alex Wolf	A. Averill 1/30	15
1/30	MSS_019_2012	Alex Wolf	A. Averill 1/30	2
2/1	MCA_003_2012	Alex Wolf	A. Averill 2/3
2/1	MSS_020_2012	Alex Wolf	A. Averill 2/3
2/1	MSS_021_2012	Alex Wolf	A. Averill 2/3
2/1	MSS_023_2012	Alex Wolf	A. Averill 2/3
2/2	MCA_004_2012	Alex Wolf	A. Averill 2/3	2
2/2	MCA_005_2012	Alex Wolf	A. Averill 2/3	2
2/2	MSS_026_2012	Alex Wolf	A. Averill 2/3	2
2/2	MSS_027_2012	Alex Wolf	A. Averill 2/3	2
2/2
2/2

Notice that RX'd means received date.

Archives

• 2009 Fabrication Page