2010:Field/Crate: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
== This is the Field/Crate Subteam's Engineering Notebook ==
== This is the Field/Crate Subteam's Engineering Notebook ==


----
----


'''1.06.2009'''
'''1.06.2009'''  


'''Start time:''' 6:45
'''Start time:''' 6:45  


'''End time:''' 8:45
'''End time:''' 8:45  


'''Members present:''' Amy, Theo, Curtis, Karen
'''Members present:''' Amy, Theo, Curtis, Karen  


<br> '''Tasks completed:'''


'''Tasks completed:'''
1.) Cut small PVC for outside uprights of trailer


1.) Cut small PVC for outside uprights of trailer
2.) Began to cut large PVC for center column


2.) Began to cut large PVC for center column
3.) Began sketching out measurements on plywood sheet


3.) Began sketching out measurements on plywood sheet
<br>
 
'''Tasks to complete:'''
 
1.) Finish cutting large PVC for center column
 
2.) Sketch and cut plywood for base
 
3.) Glue/assemble trailers
 
<br>
 
----
 
<br>
 
'''&nbsp;1.07.2009'''
 
Start time: 6:30
 
End time: 9:00
 
Members present: Amy, Theo, Kevin<br>
 
<br>Tasks completed:
 
1.) Finished cutting large PVC&nbsp;for center of trailer<br>
 
2.) Cut half of hexagonal luan plywood bases needed (6/12)<br>


3.) Cut lots of little 2x4 pieces for bumper supports<br>


4.) Sketched out bumper plywood measurements &amp; cut lines


'''Tasks to complete:'''
<br>Tasks to complete:


1.) Finish cutting large PVC for center column
1.) Cut other half of luan plywood bases<br>


2.) Sketch and cut plywood for base
2.) Cut out bumper plywood<br>


3.) Glue/assemble trailers
3.) Glue/assemble trailers

Revision as of 18:34, 7 January 2009

This is the Field/Crate Subteam's Engineering Notebook


1.06.2009

Start time: 6:45

End time: 8:45

Members present: Amy, Theo, Curtis, Karen


Tasks completed:

1.) Cut small PVC for outside uprights of trailer

2.) Began to cut large PVC for center column

3.) Began sketching out measurements on plywood sheet


Tasks to complete:

1.) Finish cutting large PVC for center column

2.) Sketch and cut plywood for base

3.) Glue/assemble trailers




 1.07.2009

Start time: 6:30

End time: 9:00

Members present: Amy, Theo, Kevin


Tasks completed:

1.) Finished cutting large PVC for center of trailer

2.) Cut half of hexagonal luan plywood bases needed (6/12)

3.) Cut lots of little 2x4 pieces for bumper supports

4.) Sketched out bumper plywood measurements & cut lines


Tasks to complete:

1.) Cut other half of luan plywood bases

2.) Cut out bumper plywood

3.) Glue/assemble trailers