2024:Drive Base: Difference between revisions

Revision as of 18:53, 18 January 2024

Drive base status

1/18/24:

We have a drive base!!

Information:

x4 Mk.4 swerve modules (Neo motors)

x4 25in. side bars

x2 bars for the outside of the frame
x2 as support/additional mounting bars in located in the middle of the drive base, the bars also serve as protection for the swerve modules preventing damage to our brand new motors
From outside bar to outside bar it is a 6.5in offset
The offset on the inside is 12in. from inside bar to inside bar

x2 27in. horizontal bars, act as end caps'

x8 Andymark Corner Brackets (picture)

-

We still need to finish and mount the following:

Fabricate the bed pan- this will house all of the electrical panels and other items to small for the C-Channel
Build a moveable plate for the hang- this plate will be most likely be

@@ Line 1: / Line 1: @@
 Drive base status
+<span style="text-decoration: underline;" >'''1/18/24:'''</span>
+We have a drive base!![[image:img1705686588494.jpeg|thumb|300px]]
+Information:
+x4 Mk.4 swerve modules (Neo motors)
+x4 25in. side bars
+*x2 bars for the outside of the frame
+*x2 as support/additional mounting bars in located in the middle of the drive base, the bars also serve as protection for the swerve modules preventing damage to our brand new motors<br>
+*From outside bar to outside bar it is a 6.5in offset&nbsp;
+*The offset on the inside is 12in. from inside bar to inside bar
+x2 27in. horizontal bars, act as end caps'
+x8 Andymark Corner Brackets (picture)[[image:img1705659284533.png|thumb|300px]]
+-
+We still need to finish and mount the following:
+*Fabricate the bed pan- this will house all of the electrical panels and other items to small for the C-Channel
+*Build a moveable plate for the hang- this plate will be most likely be