2010:Field/Crate
This is the Field/Crate Subteam's Engineering Notebook
1.06.2009
Start time: 6:45
End time: 8:45
Members present: Amy, Theo, Curtis, Karen
Tasks completed:
1.) Cut small PVC for outside uprights of trailer
2.) Began to cut large PVC for center column
3.) Began sketching out measurements on plywood sheet
Tasks to complete:
1.) Finish cutting large PVC for center column
2.) Sketch and cut plywood for base
3.) Glue/assemble trailers
1.07.2009
Start time: 6:30
End time: 9:00
Members present: Amy, Theo, Kevin
Tasks completed:
1.) Finished cutting large PVC for center of trailer
2.) Cut half of hexagonal luan plywood bases needed (6/12)
3.) Cut lots of little 2x4 pieces for bumper supports
4.) Sketched out bumper plywood measurements & cut lines
Tasks to complete:
1.) Cut other half of luan plywood bases
2.) Cut out bumper plywood
3.) Glue/assemble trailers
1.08.2009
Start time: 6:20
End time: 9:00
Members present: Amy, Theo, Curtis
Tasks completed:
1.) Finished cutting hexagonal luan plywood bases
2.) Cut metal for trailer tongues
3.) Made template for holes to be cut in hexagonal bases
Tasks to complete:
1.) Drill/cut holes in 11 other trailer bases
2.) Cut out bumper plywood
3.) Glue/assemble trailers
