Fabrication
Modeling Tips
How to Submit Parts
In order to get parts made a drawing must be completed and the appropriate files must be submitted (see below for drawing and file requirements). Please create a new line in the table FILES TO BE MADE for each part request and email the proper drawing and required files to aaverill@harris.com. Any questions, please ask Amy Averill.
Quick Breakdown of Types of Parts/Files Needed
Machined Parts (think parts made from blocks of aluminum with intricate surfaces)
1) .dwg
2) .pdf
3) .stp
Omax Parts (Sheetmetal - think flat parts with holes, bar stock to be cut to length, sheetmetal that gets bent)
1) .dwg Do save copy as a autoCAD dwg.file. Must be 2000LT
2) .pdf
3) .dxf Must be 2000LT
See links for what is required in each format and how to save the files.
Files to be made
| Date | Requested Item | Requestor | Ordered By/Date | QTY | RX'd |
|---|---|---|---|---|---|
| 1/27 | MSS_003_2012 | Alex Wolf | A. Averill 1/30 | 16 | |
| 1/30 | MSS_007_2012 | Alex Wolf | A. Averill 1/30 | 20 | |
| 1/30 | MSS_008_2012 | Alex Wolf | A. Averill 1/30 | 2 | |
| 1/30 | MSS_010_2012 | Alex Wolf | A. Averill 1/30 | 2 | |
| 1/30 | MSS_013_2012 | Alex Wolf | A. Averill 1/30 | 2 | |
| 1/30 | MSS_015_2012 | Alex Wolf | A. Averill 1/30 | 15 | |
| 1/30 | MSS_019_2012 | Alex Wolf | A. Averill 1/30 | 2 | |
| 2/1 | MCA_003_2012 | Alex Wolf | A. Averill 2/3 | ||
| 2/1 | MSS_020_2012 | Alex Wolf | A. Averill 2/3 | ||
| 2/1 | MSS_021_2012 | Alex Wolf | A. Averill 2/3 | ||
| 2/1 | MSS_023_2012 | Alex Wolf | A. Averill 2/3 | ||
| 2/2 | MCA_004_2012 | Alex Wolf | A. Averill 2/3 | 2 | |
| 2/2 | MCA_005_2012 | Alex Wolf | A. Averill 2/3 | 2 | |
| 2/2 | MSS_026_2012 | Alex Wolf | A. Averill 2/3 | 2 | |
| 2/2 | MSS_027_2012 | Alex Wolf | A. Averill 2/3 | 2 | |
| 2/2 | MSS_031_2012 | A. Averill 2/3 | |||
| 2/2 |
Notice that RX'd means received date.
