2010:Field/Crate

This is the Field/Crate Subteam's Engineering Notebook

---

1.06.2009

Start time: 6:45

End time: 8:45

Members present: Amy, Theo, Curtis, Karen

Tasks completed:

1.) Cut small PVC for outside uprights of trailer

2.) Began to cut large PVC for center column

3.) Began sketching out measurements on plywood sheet

Tasks to complete:

1.) Finish cutting large PVC for center column

2.) Sketch and cut plywood for base

3.) Glue/assemble trailers

---

 1.07.2009

Start time: 6:30

End time: 9:00

Members present: Amy, Theo, Kevin

Tasks completed:

1.) Finished cutting large PVC for center of trailer

2.) Cut half of hexagonal luan plywood bases needed (6/12)

3.) Cut lots of little 2x4 pieces for bumper supports

4.) Sketched out bumper plywood measurements & cut lines

Tasks to complete:

1.) Cut other half of luan plywood bases

2.) Cut out bumper plywood

3.) Glue/assemble trailers