2010:Integration Status
Bill of Materials
Subteams, please use the attached template to update the Bill of Materials!! Please ONLY use your own sheet (see tabs on the bottom), and upload it to the Wiki under the name BOM_(subteam).xls. For Example Drivetrain would be BOM_Drivetrain.xls. You can then update that file over and over again, and the wiki will save all of the revisions, so there is NO NEED to put a Date on it.
Integration Status
Subteams, please used the attached document to format your integration notes for the meeting. They can be handwritten or typed, it is just a reminder for what info you need to provide.
Also please make sure to update the Robot Design page as you add details to your designs!!
Integration Meetings are Tuesday & Thursday at 5:30PM, and Saturday at 1:00PM in F2 Back Room.
Integration Meeting Notes
Thursday 1/22/2009
Saturday 1/24/2009
Tuesday 1/27/2009
Thursday 1/29/2009
Saturday 1/31/2009
Tuesday 2/2/2009
Thursday 2/4/2009
Saturday 2/6/2009
Tuesday 2/9/2009
Thursday 2/11/2009
Parts Needed To Buy
Please use the Shopping List Page!
Parts Needing To Be Made
Please use the Fabrication Page!
Subteam Issue Tracking
| Date | Issue Description | Needed By (subteam) | Assigned To (subteam) | Date Needed | Complete |
| 1/8 | Need dimensions of surfaces where control system/electronics can be mounted | Electrical Main | Mech1, Mech 2, Drive | 1/15 | NO |
| 1/13 | How are trapdoors defined? | Programming | Mechanical | 1/18 | NO |
| 1/13 | Need Control Box I/O’s | Programming | Elec Controls | 1/21 | NO |
| 1/15 | Help Port ProE into Inventor | Drivetrain | Mechanical | 1/18 | NO |
| 1/17 | Need to Weight Balance | Mechanical | Elec, Mechanical, Drive | 1/31 | NO |
| 1/20 | Need to know how much frame detail is needed | Mechanical | Amy/Josh | 1/22 | NO |
| 1/20 | Mechanical Mounting Design for Mouse | Electrical | Drivetrain | 1/25 | NO |
| 1/20 | Add Fake Weight to the Chassis | Programming | Mechanical | 1/21 | NO |
| 1/20 | Update Bill of Materials | Leadership | ALL SUBTEAMS | 1/31 | NO |
| 1/20 | Fix Rubbing Wheel on Mock Drive | Programming | Drivetrain | 1/21 | NO |
Completed Issues
| Date | Issue Description | Needed By (subteam) | Assigned To (subteam) | Date Needed | Complete |
| 1/13 | Need to know what Sensors are needed | Electrical, Programming | Programming, Mechanical | 1/18 | YES |
| 1/15 | Determine if Encoder Wheel Needed | Electrical/Mechanical | Programming | 1/17 | YES |
| 1/8 | Available space and dimensions from Inventor mockup |
Mechanical 1 |
Mechanical 2 |
1/18 | YES |
