Fabrication
How to Submit Parts
In order to get parts made a drawing must be completed and the appropriate files must be submitted (see below for drawing and file requirements). Please create a new line in the table FILES TO BE MADE for each part request and email the proper drawing and required files to aaverill@harris.com. Any questions, please ask Amy Averill.
Quick Breakdown of Types of Parts/Files Needed
Machined Parts (think parts made from blocks of aluminum with intricate surfaces)
1) .dwg
2) .pdf
3) .stp
Omax Parts (Sheetmetal - think flat parts with holes, bar stock to be cut to length, sheetmetal that gets bent)
1) .dwg
2) .pdf
3) .dxf
See links for what is required in each format and how to save the files.
Files to be made
| Date | Requested Item | Requestor | Ordered By/Date | QTY | RX'd |
|---|---|---|---|---|---|
| 1/19 |
.375 traction spacer |
Matt M. |
4 | ||
| 1/19 |
.625 traction spacer |
Matt M. |
4 |
||
1/18 |
Housing |
Alex W. |
4 | ||
| 1/18 | Motor mounting bracket |
Alex W. |
2 |
||
| 1/18 | Transmission tail mounting bracket |
Alex W. |
2 |
||
| 1/23 | 30 inch bar | Ciana R. | 1 | ||
| 1/30 |
Arm Extension Box |
Matthieu |
4 |
||
| 1/30 |
Arm Extension Box 1 |
Matthieu |
4 |
||
| 1/30 |
Arm Shoulder Encouder Guard |
Matthieu |
4 |
||
| 1/30 |
Arm Shoulder Jack Shaft Tensioner |
Matthieu |
2 |
||
| 1/30 |
Arm Shoulder Latch |
Matthieu |
4 |
||
| 1/30 |
Arm Shoulder Motor Tensioner |
Matthieu |
|||
| 1/30 |
Arm Shoulder Motor Tensioner Transmission Pan |
Matthieu |
2 |
||
| 1/30 |
Arm Shoulder Support Stiffener Bottom |
Matthieu |
2 |
||
| 1/30 |
Arm Shoulder Support Stiffener Rear |
Matthieu |
2 |
||
| 1/30 |
Arm Shoulder Support Stiffener Front |
Matthieu |
2 |
||
| 1/30 |
Arm shoulder Support Structure Side Plate B |
Matthieu |
2 |
||
| 1/30 |
Arm shoulder Support Stiffener Side |
Matthieu |
4 |
||
| 1/30 |
Arm Upper Structure Leg Frame Bracket A |
Matthieu |
8 |
||
| 1/30 |
Arm Upper Support Stiffener B |
Matthieu |
4 |
||
| 1/30 |
Arm Upper Support Stiffener A |
Matthieu |
4 |
||
| 1/30 |
Clamp Bracket |
Matthieu |
4 |
||
| 1/30 |
Arm Lug Outer |
Matthieu |
4 |
||
| 1/30 |
Arm Sprocket 100T |
Matthieu |
2 |
||
| 1/30 |
Arm Inner Lug |
Matthieu |
4 |
||
| 1/30 |
Linkage Plate |
Matthieu |
2 |
||
| 1/30 |
Linkage Plate 3_1 |
Matthieu |
2 |
||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
|||||
| 1/30 |
Order Status
| Date | Requested Item | Requestor | Ordered By/Date | QTY | RX'd |
|---|---|---|---|---|---|
Parts Built Elsewhere
| Date | Part Name | Where to Make | Builder/Date | QTY | RX'd |
|---|---|---|---|---|---|
Notice that RX'd means recieved.
