2023:Controls: Difference between revisions

From 1511Wookiee
Jump to navigationJump to search
Tag: visualeditor
Line 88: Line 88:
{| class="wikitable"
{| class="wikitable"
|+
|+
!
!
!
!
|-
|-
|[[File:Terminal Dimensions.png|thumb|408x408px|Visual|alt=|none]]
|[[File:Terminal Dimensions.png|thumb|408x408px|Visual|alt=|none]]

Revision as of 15:00, 4 February 2023

Overall Concept

  • 9V battery shape ("1511 Volts")
  • Two (2) PS5 controllers
  • Piano-hinged top that opens to the right
  • Latches on the left side
  • The bottom section will contain:
    • One (1) Laptop
    • Two (2) controllers (to right of the laptop, towards the back)
    • Twelve (12) broken switches (to right of laptop, towards the front)
    • Laptop under-glow (bling)
  • The top section (bling) will contain:
    • Solar panels
    • 'Charge' gauge - possibly tied to match time
    • Other, TBD (e.g. radiation, light bulb, windmill, nuclear cooling tower)
    • Arduino for controlling bling and laptop under-glow
  • 3D-printed battery terminals on the left side - (half on top and half on bottom)
2023 Controls Overall
2023 Controls Inside


Concept Drawings

Image of a 9-Volt battery, annotated to show where features of the operator console could be
2023 Controls Idea 1
CAD model of a 9-Volt battery, annotated to show where features of the operator console could be
2023 Controls Idea 2
CAD model of an idea for the 2023 controls
2023 Controls Idea 3
Annotated drawing of an idea for the 2023 controls
2023 Controls Idea 4
Annotated drawing of an idea for the 2023 controls
2023 Controls Idea 5
Annotated drawing of an idea for the 2023 controls
2023 Controls Idea 6
Annotated drawing of an idea for the 2023 controls
2023 Controls Idea 7
Annotated drawing of a design for the 2023 controls
2023 Controls Idea 8:Clamshell top (opens to the right) - Space for controllers built in (no sliding components) - Broken switches in front of controller space - Top will be the same size as the bottom - Computer sits slightly lower in the box - Where handle goes is undecided - 9 Volt battery design - Solar panels on the inside of the top
Idea for bling: Charge Gauge


Design Info

Dimensions: 27" long by 13.5" deep by 6.55" tall

Support out largest laptop: 16.75 x 11.875

Controller stand model links:

Color Scheme:

  • Red on the left (Side with the terminals)
  • Black on the Right
  • Black Half, top: Rolling Thunder 1511 Volts (as a cut out, with translucent panel behind it)

Buttons it needs to have:

  • Broken switches (using rocker style from prior years, to help keep laptop close to the bottom)
  • Turn bling On/Off

Bling

To the right there is a visual and sizes for battery terminals

Visual
Sizes

Handle - centered on front, facing drivers: https://www.mcmaster.com/1764A31/

Hinge - piano hinge 12" long

Latches - Two (2) roller latches: https://www.amazon.com/Amerock-DOUBLE-ROLLER-ZINC/dp/B07QLNSKSD/ref=sr_1_3?keywords=Steel+Roller+Catch&qid=1674338443&sr=8-3

PEM studs:

Arduino Analog
Pin # Function Useage
1 NC
2 IOREF
3 Reset
4 +3V3
5 +5V LED and Motor
6 GND Ground
7 GND Ground
8 VIN
9 A0 Solar Panel 1
10 A1 Solar Panel 2
11 A2 Solar Panel 3
12 A3 Solar Panel 4
13 A4/SDA
14 A5/SCL
Arduino Digital
Pin # Function Useage
1 D0 not usable
2 D1 not usable
3 D2 LED Disable Switch
4 D3 LED Pattern Change Button
5 D4
6 D5 Motor Control
7 D6
8 D7
9 D8 LED Communacation
10 D9
11 SS
12 MOSI
13 MISO
14 SCK
15 GND Ground
16 AREF
17 A4/SD4
18 A5/SD5

To Do

MAKE SURE TO TAKE YOUR TOOL AND/OR GAME TESTS EVERY DAY UNTIL YOU PASS THEM, ESPECIALLY IF A MENTOR IS NOT THERE AND YOU DON'T KNOW WHAT ELSE TO DO.

Not Started

  • How do we control changing under glow patterns?
  • Design a 3D-printed cable retention scheme to hold the USB connector to the PS5 controllers
    • snap onto the underneath of the controller
    • hold thicker part of USB cable to the controller, kind of 'split'/'slit' to go around cable
    • split on end where USB cable plugs in
  • bling 3D
    • box for solar panels
      • outer dimensions so solar panels can be glued to the top of it
      • high enough to Arduino underneath
      • tabs that align with the PEM studs in the top
    • maybe a power substation to cover Arduino
    • windmill, if we are doing that
      • needs to hold the servo motor (you will find it in the red tackle box)
      • need fan blade created, to fit on servo gear
      • will lay flat on the top
    • cooling tower, maybe
      • cut in half, top to bottom, and lay onto top

In Process

  • Come up with lighting scheme - What's lit up, where are the lights being run.
  • Bling 3D
    • terminals
      • confirm the diameter/height is in scale with the size of the controls
      • When complete need to make sure to split them into two pieces

Completed

  • Brainstorm Ideas:
    • 9V Battery shape (1511 V)
    • Five (5) presets: (ground, 1st cube, 1st cone, 2nd cube, 2nd cone)
    • Keep it short (because the scoring is in front of the table)
    • Has a place to store the controllers
    • All PlayStation controller
    • Have wheels like last year?
    • NO ZIPPERS
    • No funny angles (unlike 2020)
    • Cabinet like 2020
    • Shapes on the sides that look like renewable energy sources (windmill, solar panel, etc.)
    • "Radiation"
    • Lightbulb/fan?
  • Pick which overall style we will go with
  • Ordered Ps5 controllers
  • Ordered broken switch USB board
  • Gathered (i.e. we already have):
    • USB-C cables for controllers
    • Arduino for bling (UNO R3)
    • LEDs light strips for bling
  • Determine height of pull out draw for broken switches/buttons (3.4 inches)
    • this made the laptop too high for Calla to see over it
    • at 6pm 1/15 we realized we had the wrong driver station shelf height, so are going to re-visit this
  • Get images of the sketches on the wiki
  • Figure out what we will use for broken switches and order them - Looking at using small rocker switches from a few years ago.
  • Add the overall concept drawing that Gabby did to the wiki, it's in the box on the controls shelf. Create a separate section with a description of the overall concept, most is captured in the notes from 1/17.
  • Determine the overall size of the 9V battery style controls
    • broken switches to the right of laptop
    • these could be next to laptop or maybe something that flips out (we may not have height to have a drawer going under the laptop)
  • Need to either design or find a design for the controller holders, there should be designs on the internet.
  • Determine latch design for the top cover - can we hide the latches in the battery terminals? (in or near)
  • controllers to the right of the laptop (orientation TBD due to depth, might need to rotated 90 degrees to fit in 14" depth)
  • determine what kind of top we will have over the laptop (e.g. comes completely, flips/folds out to the sides, roll top desk style, etc.)
  • Decide what handle to use (See design info for links)
  • Determine hinge design for the top cover - pick hinges
  • Find and order solar panels. Options below. ~13"x8" would be half of the laptop area:
    • 5.35" x 4.33" ($8 ea) [would need 4 for 10.7" x 8.66": $32] - seems like the best option, but take a week to come
    • 2.4" x 4.3" (3 for $17.46) [would need 2 sets for 3x2 7.2" x 8.6": $34.94]
    • 1.96" x 1.96" (10 for $15.50) [would need 2 sets for 5x4 grid for 9.8" x 7.84", but not enough Arduino analog pins for this: $31]
  • Talk with Drive Team and RCS to determine what preset buttons we need
  • Decide which latches to use (See design info for links)
  • Where will the bling on/off switch go? need to be accessible when top closed?
  • add PEM studs for laptop bracket
  • Design battery terminals (for 3D print)
  • Assigned part numbers and updated the file names with them (Parts & Assembly Log link on main page)
  • add PEM studs for hinge (on right side - make sure they are far enough in the from the edge based on the datasheet)
  • add PEM studs for laptop stand
  • flange for ethernet and power (5" wide, with winglets)
  • flange needs cutouts and holds for ethernet and power
  • add through holes for handle (front edge)
  • Two (2) PEM studs for controller holder
  • lettering cutouts (maybe lightening bolts?)
  • Part numbers for the controls parts
  • added PEM studs for hinge (on right side - make sure they are far enough in the from the edge based on the datasheet)
  • lettering, lightening bolts, and gauge cutouts
  • checked the spacing on the broken switches, the bezels don't overlap
  • added PEM 2 studs for Arduino/solar panel holder (just pick two (2) locations that would be over laptop, towards back 1/3, not near letters; maybe add solar panels to assembly as a guide)
  • ordered a USB hub
  • legs have through holes for PEM studs to go through, to attach to bottom
  • checked the spacing on the broken switches, the bezels don't overlap
  • added cross piece at back of laptop area
  • Finalize overall design scheme - Lettering, paint, battery terminals, design for stuff on the inside of the cover (solar panels) etc. Are we putting a charge indicator on the side that discharges during the match?
  • Determine the overall size height of the 9V battery style controls (other dimensions are 27 in. long, 13.5 in. deep)
  • Find a 3D print for a controller box
  • order perf board for Arduino (did find a piece, on the shelf, that might get us by for this year)
  • Created a STP file for the top and bottom of the control box and have it sent to Amy or Eric.
  • Created a drawing of the top and bottom of the control box with the PEMs inserted that can be given to the model shop so they can make sure they are inserted correctly. Clearly shows how the PEMs are oriented. Sent to Amy or Eric.

Meeting Minutes

1/14

Attendees: Byers, Eric, Sam, Gabby, Sami, Hailey, Tyler

Work Completed:

  • primed this Wiki page
  • Reviewed previous controllers for reference
  • Made some ideas for the 2023 controller
  • Voted on controller drawings
  • Made some measurements for controller dimensions

1/15

Attendees: Byers, Sami, Sam, Tyler

Work Completed:

  • Made some CAD ideas for the controls (but it looks more like an USB than a battery)
  • Measured some controls dimensions
  • Looked at how many buttons/switches we have (we have 6 LED rectangle buttons (4 are green) and at least 10 switches)
  • We should use switches instead of buttons because we have more of them
  • PS5 controllers were picked (talked with Calla & Peter); they are on the shopping list
  • Found 2 orange 6' USB C cables [put on controls shelf]
  • Put USB to Joystick board on shopping list (for broken switches)

1/17

Attendees: Sam, Sami, Tyler, Ben, Byers, Eric, Gabby

Work Completed:

  • Added images of the controls ideas to the wiki
  • Discussed the design of the controls
  • Decided that the laptop height should be just tall enough to fit a power brick underneath
  • Decided that the controllers should be on a stand to the right of the laptop
  • Decided that the broken switches and LED toggle button should also be to the right of the laptop, in front of the controllers
  • Decided that the bling should be on the inside of the top
  • Decided that the top should hinge open instead of latch
  • Decided that the top of the (closed) laptop should be about level with the surface of the controls

1/18

Attendees: Byers, Sam

Work Completed:

  • Started making a CAD model for the design of the controls
  • Controllers and broken switch joystick board came in
  • decided on previous year's rocker broken switches; put on shopping list
  • narrowed down the options for the solar panels

1/19

Attendees: Sami, Gabby, Sam

Work Completed:

  • Add the overall concept drawing that Gabby did to the wiki, it's in the box on the controls shelf. Create a separate section with a description of the overall concept, most is captured in the notes from 1/17.
  • Determine the overall size of the 9V battery style controls
    • broken switches to the right of laptop
    • these could be next to laptop or maybe something that flips out (we may not have height to have a drawer going under the laptop)
  • Considered that the handles should be on opposite sides (one slightly above the other, so that both the top and bottom have handles)
  • Considered that it may be better to have controller holders with a box shape, so that it isn't specific to the just PS5 controllers, can store other items, and would be easier to CAD.
  • Looking at different handles (See design info for links)
  • Decided that 4 of the the 5.35" x 4.33" ($8 each) solar panels would be the best ones to use
  • Need to either design or find a design for the controller holders, there should be designs on the internet. (A sunken in box/bin)
  • Decided that the hinge should be on the right and the latch should be on the left
  • Looked at hinges and latches (See design info for links)
  • Considered that the exterior terminals of the battery should be 3D-Printed parts and should be on the same side as the latches (but only attach to the bottom)
  • Considered that the LED lights should run around the perimeter of the bottom (under the laptop) and across to the top, possibly in a pattern/design around the solar panels.
  • Decided that at least somewhere on the design should say or allude to "1511 Volts"
  • Considered decorating the top with 3D-printed parts that represent clean energy sources (wind turbine, hydroelectric, etc.) and outlining them with LED lights
  • Decided not to have a "charge indicator on the side that discharges during the match"
  • Considered that the exterior colors should be: black on the left and red on the right (side with the terminal), in the approx. proportions of a 9-volt battery.
  • Started CAD design for the battery terminals (to 3D-print)

1/21

Attendees: Sam, Sami, Byers, Gabby, Eric, Tyler, Hailey

Work Completed:

  • Considered that the solar panels should be for bling (only) and not be used to power anything
  • Considered using silver hardware (handles, latches, hinges) so it will stand out
  • Decided that the handles should be on the front side
  • Looked in the closet for previous designs of handles, hinges, and latches
  • Worked on the CAD for the controls (sheet metal)
  • Put the handle and solar panels on the shopping list
  • Decided to use a piano hinge
  • Found piano hinge (and put on shelve in small closet)
  • Worked on the assembly CAD for the controls and related items (laptop, controllers, etc.)
  • Tested latch ideas
  • Decided which latches to use
  • Flushed out detail items remaining for CAD and 3D

1/22

Attendees: Sami, Gabby, Sam, Byers

Work Completed:

  • Where will the bling on/off switch go? need to be accessible when top closed? (On the inside)
  • Worked on the CAD for the controls interior
  • Worked on the CAD for the controls exterior
  • took motor out of a servo, added wires, and proved it will work with varying voltages
  • Added all lettering, battery, and lightening bolt cutouts
  • Made a prototype for the Arduino
  • Added PEM studs for the controllers
  • Added PEM studs for the hinge

1/24

Attendees: Sam, Byers

Work Completed:

  • Added PEM studs for the laptop

1/25

Attendees: N/A- Cancelled because of snow

Work Completed:

  • N/A- Cancelled because of snow

1/26

Attendees: Sami, Gabby, Sophia (had nothing to do, so helped Controls out)

Work Completed:

  • Found different design ideas for windmill propeller (links in Design Info)
  • Found more design ideas for controller stands (links in Design Info, organized into different categories)

1/28

Attendees: Sam, Sami, Gabby, Byers

Work Completed:

  • Worked on the CAD for the battery terminals
  • Worked on the CAD for the controls interior
  • Re-named some controls CAD files with the correct part numbers
  • added PEM studs for the hinge
  • added through holes for handle
  • Replaced spade terminals for broken switches and tested the board... its worked!
  • Added PEM studs for the solar panels
  • checked the spacing on the broken switches, the bezels don't overlap
  • Ordered a 4-port USB hub
  • Shop drawing of laptop stand
  • Shop drawings of both exteriors
  • Did the CAD for the controller holders and got that in the parts list

1/29

Attendees: Sami, Byers, Gabby, Eric

Work Completed:

  • Shop drawings: .pdf and .dxf for laptop stand
  • Shop drawings: .pdf and .dxf for controller top half
  • Shop drawings: .pdf and .dxf for controls bottom half
  • Soldered wires onto solar panels and tested them, they worked (produced about 5 volts under a phone flashlight)
  • Added images of the CAD to this page
  • initial circuit diagram
  • created list of components needed for the bling board
  • ordered perf board for Arduino
  • tested to see what resistor values needed for the solar panels

1/31

Attendees: Sami, Sam

Work Completed:

  • Create a(n) STP file for the top and bottom of the control box and have it sent to Amy or Eric. Here are directions for creating a stp file: Fabrication - .stp - 1511Wookiee (penfieldrobotics.com)
  • Made an annotated version of the shop drawings to clarify information about the PEM studs.
  • Moved items from "Not started" to "In Process"

2/1

Attendees: Sami, Eric

Work Completed:

  • Created an Arduino Analog and Digital table (Above "To Do" List)
  • Created a spread sheet for the Battery Terminals (Added visuals also) (Both in Design Info)

2/2

Attendees: Sami, Junias

Work Completed:

  • Measured rough dimensions for a single solar panel: The longer side is about 5.351 inches and the smaller side is about 4.325 inches
    • NOTE: when we went into the small closet we only saw 3 out of 4 solar panels.

2/4

Attendees: Sam, Sami, Byers

Work Completed:

  • Controls sheet-metal parts arrived
  • Cleaned and filed the sheet-metal parts
  • Drilled hole for latches and handle
  • Put together controls, and took apart
  • Started Painting the sheet-metal parts

2/5

Attendees:

Work Completed:

2/7

Attendees:

Work Completed:

2/8

Attendees:

Work Completed:

2/9

Attendees:

Work Completed:

2/11

Attendees:

Work Completed:

2/12

Attendees:

Work Completed:

2/14

Attendees:

Work Completed:

2/15

Attendees:

Work Completed:

2/16

Attendees:

Work Completed:

2/18

Attendees:

Work Completed:

2/19

Attendees:

Work Completed:

2/21

Attendees:

Work Completed:

2/22

Attendees:

Work Completed:

2/23

Attendees:

Work Completed:

2/25

Attendees:

Work Completed:

2/26

Attendees:

Work Completed:

2/28

Attendees:

Work Completed:

3/1

Attendees:

Work Completed:

3/2

Attendees:

Work Completed:

3/4

Attendees:

Work Completed:

3/5

Attendees:

Work Completed:

3/7

Attendees:

Work Completed:

3/8

Attendees:

Work Completed:

3/9

Attendees:

Work Completed:

3/11

Attendees:

Work Completed:

3/12

Attendees:

Work Completed:

3/14

Attendees:

Work Completed:

Controls Rules 2023

DRIVER STATION

Height of driver station shelf from floor: 3ft .75in (36.75) inches

Total height of driver station: 6ft 6in (78 in)

Maximum size controls: 78 - 36.75 = 14" deep x 60" wide x 41.25" tall

CAD model of the 2023 driver station, annotated with dimensions
2023 Driver Station


9.9 OPERATOR CONSOLE

R901 *Use the specified Driver Station Software. The Driver Station Software provided by National Instruments (install instructions found here) is the only application permitted to specify and 9 ROBOT Construction Rules V2 109 of 141 communicate the operating mode (i.e. AUTO/TELEOP) and operating state (Enable/Disable) to the ROBOT. The Driver Station Software must be version 22.0 or newer.


R902 *The OPERATOR CONSOLE must have a visible display. The OPERATOR CONSOLE, the set of COMPONENTS and MECHANISMS used by the DRIVERS and/or HUMAN PLAYERS to relay commands to the ROBOT, must include a graphic display to present the Driver Station Software diagnostic information. It must be positioned within the OPERATOR CONSOLE so that the screen display can be clearly seen during inspection and in a MATCH.


R903 *Connect FMS Ethernet directly to the OPERATOR CONSOLE. Devices hosting the Driver Station Software must only interface with the FMS via the Ethernet cable provided at the DRIVER STATION (e.g. not through a switch). Teams may connect the FMS Ethernet cable to the device running the Driver Station Software directly via an Ethernet pigtail, or with a single-port Ethernet converter (e.g. docking station, USB-Ethernet converter, Thunderbolt-Ethernet converter, etc.). The Ethernet port on the OPERATOR CONSOLE must be easily and quickly accessible.

[Teams are strongly encouraged to use pigtails on the Ethernet port used to connect to the FMS. Such pigtails will reduce wear and tear on the device’s port and, with proper strain relief employed, will protect the port from accidental damage.]


R904 *OPERATOR CONSOLE physical requirements. The OPERATOR CONSOLE must not

A. be longer than 5 ft. (~152 cm)

B. be deeper than 1 ft. 2 in. (~35 cm) (excluding any items that are held or worn by the DRIVERS during the MATCH),

C. extend more than 6 ft. 6 in. (~198 cm) above the floor, or

D. attach to the FIELD (except as permitted by G301).


R905 *FIELD wireless only. Other than the system provided by the FIELD, no other form of wireless communications shall be used to communicate to, from, or within the OPERATOR CONSOLE.

[Examples of prohibited wireless systems include, but are not limited to, active wireless network cards and Bluetooth devices. For the case of the FIRST Robotics Competition, a motion sensing input device (e.g. Microsoft Kinect) is not considered wireless communication and is allowed.]


R906 *No unsafe OPERATOR CONSOLES. OPERATOR CONSOLES shall not be made using hazardous materials, be unsafe, cause an unsafe condition, or interfere with other DRIVE TEAMS or the operation of other ROBOTS.

Archives

Retrieved from "https://wiki.penfieldrobotics.com/wiki/index.php?title=2023:Controls&oldid=12211"