2018:Controls: Difference between revisions
Programming (talk | contribs) No edit summary |
Programming (talk | contribs) No edit summary |
||
| Line 46: | Line 46: | ||
*Find 4 port USB hub for 2 controllers and 2 ports on the front. | *Find 4 port USB hub for 2 controllers and 2 ports on the front. | ||
*Ether port decided: Put on side where A/V plugs are. | *Ether port decided: Put on side where A/V plugs are. | ||
**Find ether port part including datasheet; add cut-out | **Find ether port part including datasheet; add cut-out | ||
Revision as of 12:56, 20 January 2018
Overall Concepts
NES
NES Dimensions:
- Width: 10’’
- Length: 8’’
- Height: 3.5’’
Controls Dimensions:
- Width: 16’’
- Length: 14’’
- *Height: 6.5’’
Details
- Controller ports on front will be USB for the actual controllers [we do not want to have the driver plulg in controllers each match, so the ports will be for flash drivers, etc.]
- Where the white turns gray is where the system will fold open
- When the laptop turns on
or controls are plugged in, the light next to the power button will turn on - Video ports on side will be where the ethernet plug will be
- Nintendo "case" should fold open to the left
- Xbox controllers can fit on top of the laptop.
SNES Controller
NES Cartridge
Details
- Custom stickers on cartridge
- Folds out from the left side of the “notch” of the cartridge
Top Half of Arcade Cabinet
GameBoy
To do
Not Started
- Find 4 port USB hub for 2 controllers and 2 ports on the front.
- Ether port decided: Put on side where A/V plugs are.
- Find ether port part including datasheet; add cut-out
- Power cord decided: Put plug on side, where A/V plugs are (so not sticking out back and preventing controls from being tight against driver station wall). Roll up cord and put in the controls, maybe a clip to hold cord on outside of controls for quicker connection at start of match.
- Find power port part including datasheet; add cut-out
- Hinge decided: piano hinge for both lid and cartridge door
- Find and put on shoping list
- Add in a handle design (overall thought is handle on the back), need to add detail.(Handles on both sides or no handles or these on the bottom https://goo.gl/FNXMqh / https://goo.gl/Q3MRnj) [might be too heavy for no handles; doesn't appear there are 'natural' handles; handle on back might be awkward for placing them on the driver station shelf]
- Need to come up with a latch to keep controls closed.(https://goo.gl/v4L3BD) or magnets or (https://goo.gl/WQCsbg) or briefcase sytle when you push one of the buttons on the fornt the case is unlocked [suggest waiting until top and bottom mating surfaces are figured out]
- Finalize model (holes and studs for hinges, latches, USB ports, ether port, power port, PCBs, power led)
- Cut out fors: vents, lettering
- Create drawings for Harris
- Overall paint and letter scheme (low priority).
In Process
- Add detail into the metalwork.
Completed
- Select High-level Concept, work details in the concepts to help make the selection. [NES]
- Find out (in general) does the laptop and necessary parts (2 extra little boards (for buttons and something else), power supply, broken switches, and controllers.) fit in the controls box (not exact).[Yes, Xbox controllers can fit on top of the laptop]
- Make sure the control box fits in the driver station (measurement requirements found in game manual).
- Figure out where the NES opens up so that the laptop screen can be seen.
- Go through "controls"-related stuff in the shop and gather things we think we might want to use (buttons, switches, latches, etc.)
- Create a storage area for our stuff in the shop, we'll need a box or something to hold our parts.
- Talk to drive team and figure out what kind of control (Xbox, joysticks, etc.) they want this year. [Josh & Carol said to go with XBOX controllers]
- Brainstorm Ideas for Controls and record them.
- Figured out how the NES will open [To the left]
- CAD'd the NES
- Figured out the control box can fit the necessary parts such as the laptop and the broken switches.
- Found out that the control box fits the driver station requirements. (14in = 14in)
- Add the cutout for the LED next to the buttons.
- We changed the dimensions to 13.5
- Finished the labtop tray.
- Finished USB cutouts.
Useful Links
- Subteam Student/Mentor Photos
- Zero Delay USB Joystick Encoder
- http://exposantana.com/img/nes-measurements.jpg
- https://ibin.co/2pzZhDM2hmF8.png
- https://grabcad.com/library/nintendo-entertainment-system
Meeting Minutes
1/10
Attendees: Zach, Kyle, Jameson, Parker, Eric, Byers
Work Completed: Brainstormed ideas for control sets.
1/11
Attendees: Kyle
Work Completed: An attempt was made, but overall nothing got done.
1/13
Attendees: Zach, Kyle, Adrian
Work Completed: CAD'd the NES to the dimensions above. Began gathering materials. Allocated shelf space in shop closet.
1/14
Attendees: Kyle and Aidan
Work Completed: Figured out the control box can fit the necessary parts such as the laptop and the broken switches; Found out the control box fits the driver station requirements (14in = 14in); began the final NES CAD
1/16
Attendees: Eric, Parker, Aidan, Adrian, Jameson
Work Completed: Researched some handle ideas, added button cutouts and started to add USB ports to base, found a nintendo font, decided which way the controls should open (to the left), determined that we should be able to store the joysticks either on the laptop or in the top half of the chassis.
1/17
Attendees: Zach, Byers (Kaw quit controls)
Work Completed: Look at lots of possibilities for handle, hindges and latchs. Made sure things would fit in controls, working towards final details of the holes.
1/18
Attendees: Aidan, Byers
Work Completed: Made descisions on hinges, power chord, started labtop tray drawing.
1/20
Attendees: Aidan, Jameson
Work Completed: Finished USB ports and re-drew labtop tray.
1/21
Attendees:
Work Completed:
1/23
Attendees:
Work Completed:
1/24
Attendees:
Work Completed:
1/25
Attendees:
Work Completed:
1/27
Attendees:
Work Completed:
1/28
Attendees:
Work Completed:
1/30
Attendees:
Work Completed:
1/31
Attendees:
Work Completed:
2/1
Attendees:
Work Completed:
2/3
Attendees:
Work Completed:
2/4
Attendees:
Work Completed:
2/6
Attendees:
Work Completed:
2/7
Attendees:
Work Completed:
2/8
Attendees:
Work Completed:
2/9
Attendees:
Work Completed:
2/10
Attendees:
Work Completed:
2/11
Attendees:
Work Completed:
2/12
Attendees:
Work Completed:
2/13
2/14
Attendees:
Work Completed:
2/15
Attendees:
Work Completed:
2/16
Attendees:
Work Completed:
2/17
Attendees:
Work Completed:
2/18
Attendees:
Work Completed:
2/19
Attendees:
Work Completed:
2/20
Attendees:
Work Completed:
Controls Rules
8.10 OPERATOR CONSOLE
R97. The Driver Station software provided on the National Instruments website is the only application permitted to specify and communicate the operating mode (i.e. Autonomous/Teleoperated) and operating state (Enable/Disable) to the ROBOT. The Driver Station software must be revision 18.0 or newer. Teams are permitted to use a portable computing device of their choice (laptop computer, tablet, etc.) to host the DRIVER Station software while participating in competition MATCHES.
R98. The OPERATOR CONSOLE, the set of COMPONENTS and MECHANISMS used by the DRIVERS and/or HUMAN PLAYER to relay commands to the ROBOT, must include a graphic display to present the Driver Station diagnostic information. It must be positioned within the OPERATOR CONSOLE so that the screen display can be clearly seen during Inspection and in a MATCH.
R99. Devices hosting the Driver Station software must only interface with the Field Management System (FMS) via the Ethernet cable provided at the PLAYER STATION (e.g. not through a switch). Teams may connect the FMS Ethernet cable to their Driver Station device directly via an Ethernet pigtail, or with a single-port Ethernet converter (e.g. docking station, USB-Ethernet converter, Thunderbolt-Ethernet converter, etc.). The Ethernet port on the OPERATOR CONSOLE must be easily and quickly accessible. Teams are strongly encouraged to use pigtails on the Ethernet port used to connect to the FMS. Such pigtails will reduce wear and tear on the device’s port and, with proper strain relief employed, will protect the port from accidental damage.
R100. The OPERATOR CONSOLE must not Section 8 ROBOT Rules V2 96 of 127 A. be longer than 60 in. (~152 cm) B. be deeper than 14 in. (~35 cm) (excluding any items that are held or worn by the DRIVERS during the MATCH) C. extend more than 6 ft. 6 in. (~198 cm) above the floor D. attach to the FIELD (except as permitted by G19) There is a 54 in. (~137 cm) long by 2 in. (nominal) wide strip of hookand-loop tape (“loop” side) along the center of the PLAYER STATION support shelf that should be used to secure the OPERATOR CONSOLE to the shelf, per G19. See Section 3.6.1 PLAYER STATION for details. Please note that while there is no hard weight limit, OPERATOR CONSOLES that weigh more than 30 lbs. (~13 kg.) will invite extra scrutiny as they are likely to present unsafe circumstances.
R101. Other than the system provided by the ARCADE, no other form of wireless communications shall be used to communicate to, from, or within the OPERATOR CONSOLE. Examples of prohibited wireless systems include, but are not limited to, active wireless network cards and Bluetooth devices. For the case of the FIRST Robotics Competition, a motion sensing input device (e.g. Microsoft Kinect) is not considered wireless communication and is allowed.
R102. OPERATOR CONSOLES shall not be made using hazardous materials, be unsafe, cause an unsafe condition, or interfere with other DRIVE TEAMS or the operation of other ROBOTS.
