2026:Controls

From 1511Wookiee
Jump to navigationJump to search

Overall Concept

Design Idea: Satchel



Image.jpeg
 
IMG 3481.jpeg
 
Image 1.jpeg


Mock Up of Lid 'latch', using magnets (this worked well)

IMG 3518.jpeg
IMG 3519.jpeg
IMG 3520.jpeg

Stitching/Stamping

Screenshot 2026-01-18 200213.png
Screenshot 2026-01-18 201506.png
IMG 3574.jpeg


Design Info

Paint Scheme: Brown, Brass, Black

  • P073 Controls Bottom: Brown
  • P074 Controls Top: Brown
  • P075 Angle - Rolling:
  • P076 Angle - LCD:
  • P077 Angle - Thunder:
  • P078 Angle - Magnets:
  • P079 Angle - Tiny:
  • P080 Laptop Holder: Black
  • P081 Power and Ethernet: Brown
  • P082 Controller Holder: Black ABS
  • P083 Controller Holder 2: Black ABS

Overall Dimension: 23" by 13.75" without handle

Patch Dimension: 2" by 3" with 0.2" Rivets

Leather is 2.0 MM Thick

1511 stamp (0.17"H by 0.366"W)

Lightning Bolt stamp (1.5" by 2.5")

Websites:


LOGO Customized Leather Stamp Handle ...

To - Do

THY CHILDREN TAKE Y'ALLS GAME AND TOOLS TEST EVERYDAY!!!

Not Started

Design

  • LCD Cage
  • Order Glue for Leather
  • Acurate Sizing for leather
  • Test Stamps

CAD

  • Any 3D printed bones?
  • 3D Handle Insert

CAD Assembly

Test Fitting

Final Assembly

Wiring

In Progress

Design

  • Finalize Paint Scheme

CAD

CAD Assembly

Shop Drawings

Test Fitting

Final Assembly

Wiring

Completed

Design

  • Added design pictures to the "Overall Concept" and the "Design Info" section
  • Added links for fonts, videos, and bling to the "Design Info" section
  • Brought over 2025 files to 2026: Laptop holder, Controller holder, Ethernet, Bottom, Lid, Controller, Laptop, Magnet
  • Finalized design concept
  • Magnet mock up (lid)
  • Determined overall size (23" by 13.75" without handle)
  • Added leather, magnets, sliding tape, power strip, handle, rivets, buckle strap, bag, LCD, LEDs, broken switches, power plug, Right Angle Ethernet, SD Card to shopping list
  • Determined that latch is bling only and not functional
  • Researched Thingaverse bones for 3-D printing
  • Created a to scale lid on paper
  • Found HUB, A to B USB Cable, USB for Arduino, Right Angle USB, PCB Board, Spade Connectors

CAD

  • Fixed the 'G' in Rolling Thunder
  • Added dinosaur footprints into bottom end
  • Look at end
  • Added holes for magnets and studs in the top
  • Added holes for angle supports; in supports and bottom
  • LCD: opening in bottom and PEM holes for mounting
  • Finished remaining fillets on letters
  • Added notches to angle pieces (so we can bend down later to help with lid insertion)
  • Changed mounting holes on laptop holder to correct size
  • Updated CAD for new controller holder mounting (NOTE: two holes in bottom do NOT get PEMS, like last year, see mini assembly)
  • Changed 'DIVE' to '1511' on laptop holder (just for now, incase we don't have time to work on it)
  • Assigned part numbers for all our items and updated the names in Onshape to match
  • controller holders
  • LCD opening and studs
  • Created a 1511 stamp (0.17"H by 0.366"W)
  • Created a lightning bolt stamp (1.5" by 2.5")
  • Bottom: printed 2 copies of PDF and put in binder
  • Power & Ethernet: printed 2 copies of PDF and put in binder
  • Top: created drawing and approved, created flat pattern DXF and PDF, printed 2 copies of PDF and put in binder, posted DXF and PDF to Teams
  • Changed one '1511' to a bone in the Laptop Holder
  • Laptop Holder: created drawing and got approved, created a flat pattern DXF, PDF and STEP , posted DXF, PDF, STEP to teams, printed 2 copies of PDF and put in binder
  • Angle - Tiny: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Rolling: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - LCD: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Thunder: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Magnets: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Controller Holder: created drawing and got approved, printed 2 copies and put in binder, created STL and put in teams, updated parts and assembly log and 3D printed parts request
  • Controller Holder 2 : created drawing and got approved, printed 2 copies and put in binder, created STL and put in teams, updated parts and assembly log and 3D printed parts request

CAD Assembly

  • Constrained magnets in assembly and notched end angle support
  • Created mini CAD assemblies, because we will need those for Harris Shop; included PEMs
  • Confirmed steel for magnets on top will clear end
  • Determined controller holder placement and mounting

Shop Drawings

  • Created drawings for Bottom and Power/Ethernet
  • Created a STEP oof Bottom

Test Fitting

Final Assembly

Wiring

  • Modified Broken Switches with Spade Connectors and tested
  • Removed Cap from 2023 PCB Board

Meeting Minutes

1/10 (Sat)

Attendees: Sami, Clara, Byers, Eric

Work Completed:

  • Design concepts

1/11 (Sun)

Attendees: Sami, Byers

Work Completed:

  • Design concepts

1/14 (Wed)

Attendees: Sami, Clara, Byers

Work Completed:

  • Added dinosaur font links to "Design Info" section
  • Added a YouTube link about how to stamp leather into the "Design Info" section
  • Added a picture of a stamp handle for an example into the "Design Info" section
  • Added a lego.com link for LEGO Bones to the "Design Info" section - Determined (if decided to use) 8 needed, purchase 10
  • Started bringing over files (2025 to 2026): Laptop holder, Controller holder, Ethernet, Bottom, Lid, Controller, Laptop, Magnet

1/17 (Sat)

Attendees: Sami, Clara, Matias, Byers

Work Completed:

  • Finalized design concept
  • Magnet mock up (lid)
  • Brought over files from 2025 to 2026: Laptop holder, Controller holder, Ethernet, Bottom, Lid, Controller, Laptop, Magnet (NOTE: final assembly needs constraints re-done)
  • Researched handles/straps

1/18 (Sun)

Attendees: Sami, Byers, Eric

Work Completed:

  • Started CAD
  • Determined overall size (23" by 13.75" without handle)
  • Created sizing for stamps
  • Added leather, magnets, sliding tape, and power strip on shopping list
  • Researched LCDs and Arduinos

1/21 (Wed)

Attendees: Sami, Clara, Eric

Work Completed:

  • Determined that latch is bling only and not functional
  • Designed handle for lid... its a bag... (see updated picture)
  • Figured out how to flange!!!
  • Researched Thingaverse bones for 3-D printing
  • Researched handle, rivets, clasp

1/22 (Thu)

Attendees: Sami, Clara, Byers

Work Completed:

  • Change font for Rolling Thunder
  • Determined offset of lid supports (aka Angle pieces) to top lip & fixed constraints
  • adjusted lid support lengths and how much it goes into the box
  • fixed laptop constraints in assembly
  • Researched bags

1/24 (Sat) V-CARVE WITH PIZZO

Attendees: Sami, Clara, Byers, Eric

Work Completed:

  • Added handle, rivets, buckle strap, and bag to shopping list
  • Fixed the 'G' in Rolling Thunder
  • Added dinosaur footprints into bottom end
  • Created a to scale lid on paper
  • CAD: added holes for magnets and studs in the top
  • CAD: constrained magnets in assembly and notched end angle support
  • CAD: did holes for angle supports; in supports and bottom

1/25 (Sun)

Attendees: Byers, Eric

Work Completed:

  • Created mini CAD assemblies, because we will need those for Harris Shop; included PEMs
  • picked LCD and put on shopping list
  • CAD: LCD, opening in bottom and PEM holes for mounting (NOTE: will create 'cage' around LCD)
  • confirmed steel for magnets on top will clear end
  • finished remaining fillets on letters
  • added notches to angle pieces, so we can bend down later to help with lid insertion
  • made laptop holder mounting holes slightly bigger, to match other parts
  • determined controller holder placement and mounting; updated CAD for new mounting (NOTE: two holes in bottom do NOT get PEMs, like last year, see mini assembly)
  • change 'DIVE' to '1511' on laptop holder (just for now, incase we don't have time to work on it)
  • assigned part numbers for all our items and updated the names in OnShape to match
  • created drawings for Bottom and Power/Ethernet; create STEP of bottom
  • reviewed drawings

1/26 (Mon)

Attendees: Byers

Work Completed:

  • Assigned numbers for the Bottom and Top assemblies
  • created drawing for Bottom Assembly
  • created flat pattern files (i.e. DXF) for Bottom and Power/Ethernet
  • created PDF files for Bottom, Power/Ethernet, and Bottom Assembly
  • posted all 5 files to Teams

1/28 (Wed) V-CARVE WITH PIZZO (Lightning Bolt (Reverse) & 1511 (Reverse))

Attendees: Sami, Clara, Eric

Work Completed:

  • Created a 1511 stamp (0.17"H by 0.366"W)
  • Created a lightning bolt stamp (1.5" by 2.5")
  • Bottom: printed 2 copies of PDF and put in binder
  • Power & Ethernet: printed 2 copies of PDF and put in binder
  • Top: created drawing and approved, created flat pattern DXF and PDF, printed 2 copies of PDF and put in binder, posted DXF and PDF to Teams
  • Found a bone to put on the laptop holder.

1/29 (Thu)

Attendees: Sami, Clara, Byers

Work Completed:

  • Changed one '1511' to a bone in the Laptop Holder
  • Laptop Holder: created drawing and got approved, created a flat pattern DXF, PDF, and STEP, posted DXF, PDF, and STEP to teams, printed 2 copies of PDF and put in binder
  • Angle - Tiny: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Rolling: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Added LEDs to shopping list
  • Angle - LCD: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Thunder: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder
  • Angle - Magnets: created drawing and got approved, created a flat pattern DXF and PDF, posted DXF and PDF to teams, printed 2 copies of PDF and put in binder

1/31 (Sat)

Attendees: Sami, Eric, Byers

Work Completed:

  • Controller Holder: created drawing and got approved, printed 2 copies and put in binder, created STL and put in teams, updated parts and assembly log and 3D printed parts request
  • Controller Holder 2 : created drawing and got approved, printed 2 copies and put in binder, created STL and put in teams, updated parts and assembly log and 3D printed parts request
  • Added broken switches to shopping list
  • Found HUB, A to B USB Cable, USB for Arduino, Right Angle USB, PCB Board, Spade Connectors
  • Ordered power plug, Right Angle Ethernet, SD Card
  • Worked on Paint Scheme
  • Modified Broken Switches with Spade Connectors and tested
  • Removed Cap from 2023 PCB Board

2/1 (Sun)

Attendees:

Work Completed:


2/3 (Tue)

Attendees:

Work Completed:


2/4 (Wed)

Attendees:

Work Completed:


2/5 (Thu)

Attendees:

Work Completed:


2/7 (Sat)

Attendees:

Work Completed:


2/8 (Sun)

Attendees:

Work Completed:


2/10 (Tue)

Attendees:

Work Completed:


2/11 (Wed)

Attendees:

Work Completed:


2/12 (Thu)

Attendees:

Work Completed:


2/14 (Sat)

Attendees:

Work Completed:


2/15 (Sun)

Attendees:

Work Completed:


2/17 (Tue)

Attendees:

Work Completed:


2/18 (Wed)

Attendees:

Work Completed:


2/19 (Thu)

Attendees:

Work Completed:

2/21 (Sat)

Attendees:

Work Completed:


2/22 (Sun)

Attendees:

Work Completed:


2/24 (Tue)

Attendees:

Work Completed:


2/25 (Wed)

Attendees:

Work Completed:


2/26 (Thu)

Attendees:

Work Completed:


2/28 (Sat)

Attendees:

Work Completed:

3/1 (Sun)

Attendees:

Work Completed:


3/3 (Tue)

Attendees:

Work Completed:


3/4 (Wed)

Attendees:

Work Completed:


3/5 (Thu)

Attendees:

Work Completed:


3/7 (Sat)

Attendees:

Work Completed:


3/8 (Sun)

Attendees:

Work Completed:

2026 Controller Map

Archives

Retrieved from "https://wiki.penfieldrobotics.com/wiki/index.php?title=2026:Controls&oldid=14227"