Fabrication

How To Submit Parts for Fabrication At Harris

Follow the steps below for proper modeling and submittal of parts. It is critical to understand the type of part that is being made (sheetmetal or machined) as this will dictate the model generation along with the types of files that will be required in order to physically make the part.

If you have any questions, please ask Amy Averill (aaverill ---AT--- harris --DOT-- com).

Steps For Fabrication

1. Determine if the part will be a sheetmetal part or a solid part
   • Sheetmetal Parts: flat parts with holes that go all the way through the material, bar stock that needs to be cut to length, flat parts that get bent into a shape
   • Machined Parts: pieces with intricate surfaces made from a block of aluminum
2. Model the part appropriately depending on if the part is Sheetmetal or Machined from a solid part in Inventor:
   • Sheetmetal Parts: You must meet very specific requirements in the design of your part! Read the instructions on the Sheetmetal at Harris page to configure your part for the required bend radius and material thickness!
   • Machined Parts:
3. Create the necessary supporting documentation for fabrication:
   • Sheetmetal Parts: Click this link for steps on generating documentation for Sheetmetal Parts at Harris: Preparing Files for Fabrication
     -- OR --
   • Machined Parts: Click this link for steps on generating documentation for Machined Part Files and Documents
4. Have all files checked by a mentor!
5. Email the required files to aaverill ---AT--- harris --DOT-- com.
   • CLICK the links below for each file type needed to get a detailed set of instructions on what is required for each format and how to save the files!

     Sheetmetal Parts

     • .pdf
     • .dxf - Must be 2000LT

     Machined Parts

     • .pdf
     • .stp

6. Update the Google Drive Part & Assembly log to indicate that the part has been sent to Harris for fabrication.

Archives

• 2009 Fabrication Page