Fabrication
How to Submit Parts
In order to get parts made a drawing must be completed and the appropriate files must be submitted (see below for drawing and file requirements). Please create a new link on this page (under files to be made) for each part request and include the proper drawing and required files. Any questions at all, please ask Amy Gontarek (agontare@harris.com)
Drawing Requirements: (use the FIRST/Robotics drawing template under the English tab on the template menu). Save the .dwg as Autocad 2005 or earlier.
List Material
State Quantity
Provide Overall Dimensions
Name of student who created the drawing
Current Date - this needs to be updated everytime a drawing is submitted to get parts made (this acts as the revision control)
* If it is a sheet metal part to be bent, then the bend radius must be dimensioned along with the feature
* If the part will be welded, then care must be taken to design with the proper dimensioning scheme leaving room for the weldments
File Requirements:
- Machined Parts (think parts with intricate surfaces) - .stp
- OMAX Parts (think flat parts, bar stock to be cut to length) - .dxf
This is basically a stripped down version of the drawing. It should include the face on view of the part (no other views) with no dimensions and should
be scaled 1:1 and then saved as a .dxf
Files to be made
<u</u>
Order Status
| Date | Requested Item | Requestor | Ordered By/Date | QTY | RX'd |
|---|---|---|---|---|---|
| 1/16/09 | mount_bumper | Josh Gannon | Gontarek - 1/16/09 |
10 - dxf |
1/20/09 |
| 1/23/09 | gusset upper | Alex Wolf | Gontarek 1/23/09 | 4 -dxf | |
| 1/23/09 | 1.75 ball bearing block | Alex Wolf | Gontarek 1/23/09 | 2 - dxf | |
| 1/23/09 | tall bearing block | Alex Wolf | Gontarek 1/23/09 | 2 - dxf | |
| 1/23/09 | ball bearing block | Alex Wolf | Gontarek 1/23/09 | 14 - dxf |
|
| 1/23/09 | pulley block | Alex Wolf | Gontarek 1/23/09 | 14 - dxf | |
| 1/23/09 | gusset | Alex Wolf | Gontarek 1/23/09 | 4 -dxf | |
| 1/23/09 | bearing block mid | Alex Wolf | Gontarek 1/23/09 | 2 - dxf | |
| 1/23/09 | double pulley | Alex Wolf | Gontarek 1/23/09 | 1 - stp | |
| 1/23/09 | single pulley | Alew Wolf | Gontarek 1/23/09 | 1 - stp | |
| 1/26/09 | span foot | Alex Wolfe | Gontarek 1/26/09 | 2 - dxf | |
| 1/26/09 | right ND motor mount | Alex Wolfe | Gontarek 1/26/09 | 1 - dxf | |
| 1/26/09 | cross member tie plate 1x1 | Alex Wolfe | Gontarek 1/26/09 | 4 - dxf | |
| 1/26/09 | conveyor drive motor mounting plate | Alex Wolfe | Gontarek 1/26/09 | 3 - dxf | |
| 1/26/09 | conveyor drive motor mount clamp | Alex Wolfe | Gontarek 1/26/09 | 3 - stp | IKE shop |
