2022:Robot IO Map

Robot I/O

CAN ID Assignments

ID	Subsystem	Component Type	Model #	Brake or Coast?	Description (brief)	Operation	Notes (8) max. 40A         PDB #
0	Electrical	PD Module			Power Distribution Module feedback	monitor PD	must be CAN 0
1	RESERVED	n/a			Factory-default allows for adding new device quickly and re-assign its ID		don't use
2
3
4
5
6
7
8
9
10
11
12
13
14
15

 

 

 

 

 

 

PWM Outputs

ID	Subsystem	Component Type	Model #	Description (brief)	Operation	Brake/Coast	Notes (8) max. 40A              PDB #
0						N/A
1						N/A
2
3
4						N/A
5
6
7
8
9						Don't know
8
9

 

 

 

Relay Outputs

ID	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes
0
1
2
3

 

Analog IO

RoboRIO Analog Inputs

ID	Subsystem	Component Type	Model #	Description (brief)	Operation	Voltage Range	Notes
0
1
2
3

 

More Board Analog Inputs

ID	Subsystem	Component Type	Model #	Description (brief)	Operation	Voltage Range	Notes
0
1
2
3

 

Digital IO (GPIO)

RoboRio IO

ID	Direction (IN/OUT)	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes
0	IN
1	IN
2	IN
3	IN
4	IN
5	IN
6	IN
7	IN
8	IN
9	IN

 

 

 

Rev Robotics More Board IO

ID	Direction (IN/OUT)	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes
0	IN
1	IN
2	IN
3	IN
4	IN
5	IN
6	IN
7	IN
8	IN
9
10
11
12
13
14
15

 

I2C Registers

Address (e.g. 0100111X)	Pin (e.g. GP0)	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes
0x52

SPI Devices

#	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes

USB Host Ports

Address	Subsystem	Component Type	Model #	Description (brief)	Operation	Notes
0
1

Pneumatics Control Modules

PCM ID	#	Subsystem	Solenoid is Double or Single?	Solenoid Model #	Description (brief)	Operation	Circuit Pressure	PDB #
1	0
	1
	2
	3
	4
	5
	6
	7
2	0
	1
	2
	3
	4
	5

 

 

Robot Lights Reference

TBD if lights on 2022 robot

• When Disabled:
  • TBD
• When Enabled:
  • TBD

Operator Controls

Disable Xbox Controller

DisableXbox.docx

Controller 1 - Primary Driver

Button/Axis #	Action/Button	Description	Details
A-1	Left Joystick Y
A-1	Left Joystick X
A-4	Right Joystick Y
A-4	Right Joystick X
B-6	Right Bumper
B-5	Left Bumper
A-3	Right Trigger
A-2	Left Trigger
B-1	A Button
B-3	X Button
B-4	Y Button
B-2	B Button

 

Controller 2 - Aux Driver

Button/Axis #	Action/Button	Description	Details
A-0	Left Joystick X-Axis
A-1	Left Joystick Y-Axis
A-2	Left Trigger
A-3	Right Trigger
A-4	Right Joystick X-Axis
A-5	Right Joystick Y-Axis
B-1	A Button
B-2	B button
B-3	X Button
B-4	Y button
B-5	Left bumper
B-6	Right bumper
B-7	Back Button
B-8	Start Button
B-9	Left Stick Pressed
B-10	Right Stick Pressed
POV-0	D-pad up

Controller 3 - Switches on console

Button/Axis #	Action/Button	Description	Details
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
B-9

Dashboard

Key	Data Type	Value	Description
thunderdashboard_wheel	number	0 - do NOT know 1 - Red 2 - Green 3 - Blue 4 - Yellow	The color the robot's sensor is seeing
thunderdashboard_wheel_end	number	see thunderdashboard_wheel	The color FMS is asking for in the final stage
thunderdashboard_shooter_speed	number	0 - 100	the speed the shooter is running at: 0 is min and 100 is max
thunderdashboard_shooter_pos	number	0 - 360	the position of the turret, in degrees from home position: 0 is home
thunderdashboard_shooter_hood	number	0 - 100	the position of the hood: 0 is down, 100 is completely up
thunderdashboard_hang_pos	number	0 - 100	the position of the arm, for hang: 0 is full retracted, 100 is full extended
thunderdashboard_hang_lock	number	0 - hang ratched is not locked 1 - hang ratched is locked	indicates whether the ratchet, for hang, is engaged or not
thunderdashboard_intake_pos	number	0 - intake is down (deployed) 1 - intake is up (retracted)	indicates whether the intake is up or not
thunderdashboard_ballcount	number	-1 - do not know 0 - 5	Number of balls (game pieces) the robot thinks it has
thunderdashboard_gyro	number	0 - dashboard background not based on this 1 - dashboard background goes red	used when: gyro is calibrating
thunderdashboard_yellow	number	0 - dashboard background not based on this 1 - dashboard background goes yellow	used when: TBD NOTE: thunderdashboard_gyro takes precedence
thunderdashboard_green	number	0 - dashboard background not based on this 1 - dashboard background goes green	used when: TBD NOTE: thunderdashboard_gyro takes precendence
thunderdashboard_inpitmode	number	0 = dashboard background not based on this 1 = dashboard background is power blue	used when: robot is operating in 'pit mode' (for safer operatin in the pits) NOTE: thunderdashboard_gyro takes precendence
thunderdashboard_max	number	0 = show normal 1 = fills screen	whether to fill the laptop screen with the dashboard or not
thunderdashboard_starting_count	number	0-3	editable, set initial count of power cells in robot before auto
thunderdashboard_auto_list	string	a comma seperated list	the list of auto modes (e.g. "0,1,2,3,4,5")
thunderdashboard_auto_#	string	any text	one for each auto mode (e.g. thunderdashboard_auto_0 ... thunderdashboard_auto_5)
Auto_Mode	number	a number from thunderdashboard_auto_list	the auto mode selected on the UI
thunderdashboard_auto_start_delay	number		user selected number of seconds, 0 to 15, to delay start of auto mode
thunderdashboard_drivearcade	number	0 = tank drive 1 = arcade drive	what mode drive is using. dashboard will show 'Tank Drive' when in that mode, otherwise nothing is shown

IO Maps for Old Robots

• 2019 IO Map (applies to 2021 as well!)
• 2019 IO Map
• 2018 IO Map
• 2017 IO Map
• 2016 IO Map
• 2015 IO Map
• 2014 IO Map
• 2013 IO Map
• 2012 IO Map
• 2011 Thunderous Prime IO Map
• 2010 Thunderfoot IO Map
• 2009 Thunderplucker
• IO Pin Maps for Pre-2009 Robots